Nokia 5230 User Guide

Issue 6.0

DECLARATION OF CONFORMITY

Hereby, NOKIA CORPORATION declares that this RM-588 product is in compliance with

the essential requirements and other relevant provisions of Directive 1999/5/EC. A

copy of the Declaration of Conformity can be found at http://www.nokia.com/

phones/declaration_of_conformity/.

Nokia, Nokia Connecting People, Nokia Care, and Ovi are trademarks or registered trademarks of Nokia

Corporation. Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned

herein may be trademarks or tradenames of their respective owners.

Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form

without the prior written permission of Nokia is prohibited. Nokia operates a policy of continuous development.

Nokia reserves the right to make changes and improvements to any of the products described in this document

without prior notice.

Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial

use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard

by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4

video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional

information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG

LA, LLC. See http://www.mpegla.com.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS

LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR

INDIRECT DAMAGES HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES

OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY

OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY

TIME WITHOUT PRIOR NOTICE.

Reverse engineering of software in the device is prohibited to the extent permitted by applicable law. Insofar

as this user guide contains any limitations on Nokia's representations, warranties, damages and liabilities, such

limitations shall likewise limit any representations, warranties, damages and liabilities of Nokia's licensors.

The availability of particular products and applications and services for these products may vary by region.

Please check with your Nokia dealer for details and availability of language options. This device may contain

commodities, technology or software subject to export laws and regulations from the US and other countries.

Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close proximity to

receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such

interference cannot be eliminated. If you require assistance, contact your local service facility. This device

complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void

the user's authority to operate this equipment.

Some operations and features are SIM card and/or network dependent, MMS dependent, or dependent on the

compatibility of devices and the content formats supported. Some services are subject to a separate charge.

Your device may have preinstalled bookmarks and links for third-party internet sites. You may also access other

third-party sites through your device. Third-party sites are not affiliated with Nokia, and Nokia does not endorse

or assume liability for them. If you choose to access such sites, you should take precautions for security or

content.

/Issue 6.0 EN

Contents

Safety........................................8

About your device..................................9

Network services..................................10

1. Find help.............................11

In-device help.......................................11

Support.................................................11

Software updates over the air............12

Update software using your PC..........13

Settings.................................................13

Access codes.........................................13

Prolong battery life..............................14

Free memory........................................15

2. Get started..........................16

Insert the SIM card...............................16

Insert the battery.................................17

Insert the memory card......................18

Charge the battery...............................19

Keys and parts......................................21

Switch the device on...........................23

Lock the keys and touch screen..........23

Home screen.........................................23

Access the menu..................................24

Touch screen actions...........................24

Media key..............................................27

Change the ringing tone.....................27

Nokia support.......................................27

3. Your device.........................28

Phone setup..........................................28

Copy contacts or pictures from your

old device..............................................28

Display indicators.................................29

Contacts bar..........................................30

Antenna locations................................31

Offline profile.......................................31

Shortcuts...............................................32

Volume and loudspeaker control.......32

Sensor settings and display

rotation.................................................33

Remote lock..........................................33

Headset.................................................34

Attach a wrist strap.............................34

Remove the SIM card...........................35

Remove the memory card...................35

4. Make calls...........................36

Touch screen during calls....................36

Calls ......................................................36

During a call..........................................37

Voice mailbox ......................................37

Answer or reject a call.........................38

Make a conference call........................38

Speed dial a phone number................39

Call waiting...........................................39

Voice dialling........................................40

Video sharing.......................................40

Log ........................................................44

5. Write text............................45

Virtual keyboard...................................46

Handwriting.........................................47

Enter text with the virtual keypad.....48

Touch input settings............................50

6. Contacts..............................50

Save and edit names and numbers....51

Contacts toolbar...................................51

Manage names and numbers.............51

Default numbers and addresses.........52

Ringing tones, images, and call text

for contacts...........................................52

Copy contacts.......................................53

SIM services..........................................53

7. Messaging...........................54

Messaging main view..........................54

Write and send messages...................55

Messaging inbox..................................56

Set up e-mail........................................58

E-mail service.......................................58

Mailbox..................................................58

Mail for Exchange.................................61

View messages on a SIM card.............62

Cell broadcast messages.....................62

Service commands...............................62

Messaging settings..............................63

Chat.......................................................65

8. Personalise your device......66

Change the look of your device..........66

Profiles..................................................67

9. Music...................................67

Music player..........................................67

Ovi Music...............................................71

Nokia Podcasting.................................71

Radio.....................................................73

Internet radio.......................................74

10. Camera..............................77

Activate the camera.............................77

Image capture......................................77

Video recording....................................82

11. Gallery...............................84

View and organise files.......................84

View images and videos.....................85

Organise images and videos...............85

12. Share online......................86

About Share online..............................86

Subscribe to services...........................86

Manage your accounts.........................87

Create a post.........................................87

Post files from Gallery .........................87

13. Nokia Video Centre...........88

View and download video clips..........88

Video feeds...........................................89

My videos..............................................90

Transfer videos from your PC..............90

Video centre settings...........................91

14. Internet.............................92

About the web browser......................92

Browse the web...................................92

Contents

Add a bookmark...................................92

Subscribe to a web feed......................93

15. Positioning (GPS)..............93

About GPS.............................................93

Assisted GPS (A-GPS)............................94

Hold your device correctly...................95

Tips on creating a GPS connection.....95

Position requests.................................96

Landmarks............................................96

GPS data................................................97

Positioning settings.............................97

16. Maps..................................98

Maps overview.....................................98

View your location and the map........99

Map view.............................................100

Change the look of the map.............100

Download and update maps............101

About positioning methods..............101

Find a location...................................102

View location details.........................103

Save places and routes......................103

View and organise places or routes.104

Send places to your friends..............104

Share location....................................105

Synchronise your Favourites............106

Get voice guidance............................106

Drive to your destination..................107

Navigation view.................................108

Get traffic and safety information. . .108

Walk to your destination..................109

Plan a route........................................109

17. Connectivity....................111

Data connections and access points 111

Network settings...............................111

Access points......................................112

Active data connections....................114

Synchronisation.................................115

Bluetooth connectivity......................115

USB......................................................120

PC connections...................................121

Administrative settings.....................121

18. Search.............................122

About Search......................................122

Start a search.....................................122

19. About Ovi Store...............123

20. Other applications..........123

Clock....................................................123

Calendar..............................................124

File manager......................................125

Application manager.........................126

RealPlayer ..........................................129

Recorder.............................................131

Write notes.........................................131

Make calculations..............................131

Converter............................................132

Dictionary...........................................132

21. Settings...........................132

Phone settings...................................133

Call settings........................................140

Contents

22. Troubleshooting.............142

23. Protect the environment 145

Save energy........................................145

Recycle................................................145

Product and safety

information..........................146

Index.....................................155

Contents

Safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read

the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle

while driving. Your first consideration while driving should be road

safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect

performance.

SWITCH OFF IN RESTRICTED AREAS

Follow any restrictions. Switch the device off in aircraft, near medical

equipment, fuel, chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ACCESSORIES AND BATTERIES

Use only approved accessories and batteries. Do not connect

incompatible products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

About your device

The wireless device described in this guide is approved for use on the WCDMA

900/2100 and GSM/EDGE 850/900/1800/1900. Contact your service provider for

more information about networks.

Your device supports several connectivity methods and like computers may be

exposed to viruses and other harmful content. Exercise caution with messages,

connectivity requests, browsing, and downloads. Only install and use services and

software from trustworthy sources that offer adequate security and protection,

such as applications that are Symbian Signed or have passed the Java Verified™

testing. Consider installing antivirus and other security software on your device and

any connected computer.

Your device may have preinstalled bookmarks and links for third-party internet sites

and may allow you to access third-party sites. These are not affiliated with Nokia,

and Nokia does not endorse or assume liability for them. If you access such sites,

take precautions for security or content.

Warning: To use any features in this device, other than the alarm clock, the

device must be switched on. Do not switch the device on when wireless device use

may cause interference or danger.

When using this device, obey all laws and respect local customs, privacy and

legitimate rights of others, including copyrights. Copyright protection may prevent

some images, music, and other content from being copied, modified, or transferred.

Make back-up copies or keep a written record of all important information stored

in your device.

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

The images in this guide may differ from your device display.

Refer to the user guide for other important information about your device.

Safety

Network services

To use the device you must have service from a wireless service provider. Some

features are not available on all networks; other features may require that you make

specific arrangements with your service provider to use them. Network services

involve transmission of data. Check with your service provider for details about fees

in your home network and when roaming on other networks. Your service provider

can explain what charges will apply. Some networks may have limitations that affect

how you can use some features of this device requiring network support such as

support for specific technologies like WAP 2.0 protocols (HTTP and SSL) that run on

TCP/IP protocols and language-dependent characters.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, these features will not appear on your device menu.

Your device may also have customized items such as menu names, menu order, and

icons.

Safety

1. Find help

In-device help

Your device contains instructions to help to use the applications in your device.

To open help texts from the main menu, select Menu > Help and the application

for which you want to read instructions.

When an application is open, to access the help text for the current view, select

Options > User guide.

When you are reading the instructions, to change the size of the help text, select

Options > Decrease font size or Increase font size.

You may find links to related topics at the end of the help text. If you select an

underlined word, a short explanation is displayed. Help texts use the following

indicators:

Link to a related help topic. Link to the application being discussed.

When you are reading the instructions, to switch between help texts and the

application that is open in the background, select Options > Show open

applications and the desired application.

Support

When you want to learn more about how to use your product or you are unsure

how your device should function, see the support pages at www.nokia.com/support

or your local Nokia website, www.nokia.mobi/support (with a mobile device), the

Help application in the device, or the user guide.

If this does not resolve your issue, do one of the following:

● Restart the device: switch off the device, and remove the battery. After about a

minute, replace the battery, and switch on the device.

● Restore the original factory settings as explained in the user guide. Your

documents and files will be deleted in the reset, so back up your data first.

● Update your device software regularly for optimum performance and possible

new features, as explained in the user guide.

If your issue remains unsolved, contact Nokia for repair options. See

www.nokia.com/repair. Before sending your device for repair, always back up the

data in your device.

Software updates over the air

Select Menu > Applications > SW update.

With Software update (network service), you can check if there are updates available

for your device software or applications, and download them to your device.

Downloading software updates may involve the transmission of large amounts of

data (network service).

Make sure that the device battery has enough power, or connect the charger before

starting the update.

Warning: If you install a software update, you cannot use the device, even

to make emergency calls, until the installation is completed and the device is

restarted. Be sure to back up data before accepting installation of an update.

After updating your device software or applications using Software update, the

instructions related to the updated applications in the user guide or the helps may

no longer be up to date.

To download the available updates, select

. To unmark specific updates that you

do not want to download, select the updates from the list.

To view information on an update, select the update and

To view the status of previous updates, select

Select Options and from the following:

● Update via PC — Update your device using a PC. This option replaces the Start

update option when updates are only available using the Nokia Software Updater

PC application.

● View update history — View the status of previous updates.

● Settings — Modify the settings, such as the default access point used for

downloading updates.

Find help

● Disclaimer — View the Nokia licence agreement.

Update software using your PC

Nokia Software Updater is a PC application that enables you to update your device

software. To update your device software, you need a compatible PC, broadband

internet access, and a compatible USB data cable to connect your device to the PC.

To get more information and to download the Nokia Software Updater application,

go to www.nokia.com/softwareupdate.

Settings

Your device normally has MMS, GPRS, streaming, and mobile internet settings

automatically configured in the device, based on your network service provider

information. You may have settings from your service providers already installed in

your device, or you may receive or request the settings from the network service

providers as a special message.

Access codes

If you forget any of the access codes, contact your service provider.

● Personal identification number (PIN) code — This code protects your SIM card

against unauthorised use. The PIN code (4 - 8 digits) is usually supplied with the

SIM card. After three consecutive incorrect PIN code entries, the code is blocked,

and you need the PUK code to unblock it.

● UPIN code — This code may be supplied with the USIM card. The USIM card is an

enhanced version of the SIM card and is supported by 3G mobile phones.

● PIN2 code — This code (4 - 8 digits) is supplied with some SIM cards, and is

required to access some functions in your device.

● Lock code (also known as security code) — The lock code helps you to protect

your device against unauthorised use. The preset code is 12345. You can create

and change the code, and set the device to request the code. Keep the new code

secret and in a safe place separate from your device. If you forget the code and

your device is locked, your device will require service. Additional charges may

Find help

apply, and all the personal data in your device may be deleted. For more

information, contact a Nokia Care Point or your device dealer.

● Personal Unblocking Key (PUK) code and PUK2 code — These codes (8 digits) are

required to change a blocked PIN code or PIN2 code, respectively. If the codes

are not supplied with the SIM card, contact the network service provider whose

SIM card is in your device.

● UPUK code — This code (8 digits) is required to change a blocked UPIN code. If

the code is not supplied with the USIM card, contact the network service provider

whose USIM card is in your device.

● International Mobile Equipment Identity (IMEI) number — This number (15 or 17

digits) is used to identify valid devices on the GSM network. Devices that are, for

example, stolen, can be blocked from accessing the network. The IMEI number

for your device can be found under the battery.

Prolong battery life

Many features in your device increase the demand on battery power and reduce the

battery lifetime. To save battery power, note the following:

● Features that use Bluetooth connectivity, or allowing such features to run in the

background while using other features, increase the demand on battery power.

Deactivate Bluetooth connectivity when you do not need it.

● If you have selected Packet data connection > When available in the

connection settings, and there is no packet data coverage (GPRS), the device

periodically tries to establish a packet data connection. To prolong the operating

time of your device, select Packet data connection > When needed.

● The Maps application downloads new map information when you move to new

areas on the map, which increases the demand on battery power. You can

prevent the automatic download of new maps.

● If the signal strength of the cellular network varies much in your area, your device

must scan for the available network repeatedly. This increases the demand on

battery power.

Find help

If the network mode is set to dual mode in the network settings, the device

searches for the 3G network. To set the device to use only the GSM network, select

Menu > Settings and Connectivity > Network > Network mode > GSM.

● The backlight of the display increases the demand on battery power. In the

display settings, you can adjust the display brightness and change the time-out

period after which the backlight is switched off. Select Menu > Settings and

Phone > Display > Brightness or Light time-out.

● Leaving applications running in the background increases the demand on battery

power. To access the applications you are not using, press and hold the menu

key, and select an application.

Free memory

To view how much space is available for different data types, select Menu >

Applications > Office > File mgr..

Many features of the device use memory to store data. The device notifies you if the

memory in different memory locations is low.

To free memory, transfer data to a compatible memory card (if available) or to a

compatible computer.

To remove data you no longer need, use File manager or open the respective

application. You can remove the following:

● Messages in the folders in Messaging and retrieved e-mail messages in the

mailbox

● Saved web pages

● Contact information

● Calendar notes

● Applications shown in Application manager that you do not need

● Installation files (.sis or .sisx) of applications you have installed. Transfer the

installation files to a compatible computer.

● Images and video clips in Gallery. Back up the files to a compatible computer.

Find help

2. Get started

Insert the SIM card

Important: To prevent damage to the SIM card, always remove the battery

before you insert or remove the card.

Important: Do not use a mini-UICC SIM card, also known as a micro-SIM card,

a micro-SIM card with an adapter, or a SIM card that has a mini-UICC cutout (see

figure) in this device. A micro SIM card is smaller than the standard SIM card. This

device does not support the use of micro-SIM cards and use of incompatible SIM

cards may damage the card or the device, and may corrupt data stored on the card.

A SIM card may be already inserted in the device. If not, do the following:

1. Open the cover of the SIM card slot.

Get started

2. Insert a SIM card in the SIM card slot. Make sure the contact

area on the card is facing up. Push the card in.

3. Close the cover of the SIM card slot. Make sure the cover

is properly closed.

If the SIM card is not properly in place, the device can only be

used in the offline profile.

Insert the battery

Safe removal. Always switch the device off and disconnect the charger before

removing the battery.

1. Remove the back cover.

Get started

2. Insert the battery.

3. To replace the cover, direct the top locking catches

toward their slots, and press down until the cover

locks into place.

Insert the memory card

Use only compatible microSD and microSDHC cards approved by Nokia for use with

this device. Nokia uses approved industry standards for memory cards, but some

brands may not be fully compatible with this device. Incompatible cards may

damage the card and the device and corrupt data stored on the card.

Get started

1. Open the cover of the memory card slot.

2. Insert a compatible memory card in the memory card slot. Make sure the

contact area on the card is facing up. Push

the card in. You can hear a click when the

card locks into place.

3. Close the cover of the memory card slot.

Make sure the cover is properly closed.

Charge the battery

Your battery has been partially charged at the factory. If the device indicates a low

charge, do the following:

1. Connect the charger to a wall outlet.

Get started

2. Connect the charger to the device.

3. When the device indicates a full charge, disconnect the charger from the device,

then from the wall outlet.

You do not need to charge the battery for a specific length of time, and you can use

the device while it is charging. If the battery is completely discharged, it may take

several minutes before the charging indicator appears on the display or before any

calls can be made.

Tip: Disconnect the charger from the wall outlet when the charger is not in

use. A charger that is connected to the outlet consumes power even when it

is not connected to the device.

Get started

Keys and parts

1 — Micro USB connector

2 — Nokia AV connector (3.5 mm)

3 — Charger connector

4 — Power key

5 — Earpiece

6 — Touch screen

7 — Proximity sensor

8 — Volume/Zoom key

9 — Media key

10 — Lock switch

11 — Capture key

Get started

12 — End key

13 — Menu key

14 — Call key

15 — Camera lens

16 — Loudspeaker

17 — SIM card slot

18 — Memory card slot

19 — Wrist strap hole

20 — Microphone

Your device also comes with a plectrum stylus that can be attached to the device

with the wrist strap.

Do not cover the area above the touch screen, for example,

with protective film or tape.

Get started

Switch the device on

1. Press and hold the power key.

2. If the device asks for a PIN code or lock code, enter it,

and select OK. To delete a number, select

. The

factory setting for the lock code is 12345.

3. Select your location. If you accidentally select the wrong

location, select Back.

4. Enter the date and time. When using the 12-hour time

format, to switch between a.m. and p.m., select any

number.

Lock the keys and touch screen

To lock or unlock the touch screen and the keys, slide the lock switch on the side of

the device.

When the touch screen and keys are locked, the touch screen is switched off and

the keys are inactive.

The screen and keys may be locked automatically after a period of inactivity. To

change settings for automatic screen and key locking, select Menu > Settings and

Phone > Phone mgmt. > Auto. keyguard > Keypad autolock.

Home screen

The home screen is your starting point where you can collect all your important

contacts or application shortcuts.

Get started

Interactive display elements

To open the clock application, select the clock (1).

To open the calendar, or to change the profile, select the

date or the profile name (2).

To view or modify connectivity settings (

), or to view

missed events, select the top right corner (3).

To make a phone call, select Telephone or

(4).

To open the contacts list, select Contacts or

(5).

To open the main menu, press the menu key (6).

Start using the contacts bar — To start using the contacts

bar, and to add your contacts to the home screen, select

> Options > New contact, and follow the instructions.

Change the home screen theme or shortcuts — Select

Menu > Settings and Personal > Home screen.

Music keys — When music or the radio is playing in the

background, music keys (play/pause, skip backward, and

skip forward) are displayed in the home screen.

Access the menu

To access the menu, press the menu key.

To open an application or folder in the menu, select the item.

Touch screen actions

Tap and double-tap

To open an application or other element on the touch screen, you normally tap it

with your finger or the stylus. However, to open the following items, you must tap

them twice.

Get started

Important: Use only a stylus approved by Nokia for use with this device. Using

any other stylus may invalidate any warranty applying to the device and may

damage the touch screen. Avoid scratching the touch screen. Never use an actual

pen or pencil or other sharp objects to write on the touch screen.

● List items in an application, such as the Drafts folder in the folder list in Messaging

Tip: When you open a list view, the first item is already highlighted. To

open the highlighted item, tap it once.

● Applications and folders in the menu when using the list view type

● Files in a file list, for example, an image in the images and videos view in Gallery.

If you tap a file or similar item once, it is not opened, it becomes highlighted. To

see the options available for the item, select Options or, if available, select an

icon from a toolbar.

Select

In this user documentation, opening applications or items by tapping them once or

twice is called "selecting". If you need to select several items in a sequence, the

menu items to select are separated by arrows. To select Options > User guide,

tap Options, and then tap User guide.

Drag

To drag, place your finger or the stylus on the screen, and slide it across the screen.

To scroll up or down on a web page, drag the page with your finger or stylus.

Get started

Swipe

To swipe, slide your finger or the stylus quickly left or right on the screen. When

viewing an image, to view the next or previous

image, swipe the image left or right, respectively.

Swipe to unlock the touch screen — To unlock the

touch screen, press the power key or the menu key,

and swipe from right to left.

Swipe to unlock the touch screen and mute a

call — To unlock the touch screen without answering

a call, swipe from right to left. The ringing tone is muted automatically. To answer

the call, press the call key, or to reject the call, press the end key.

Swipe to answer a call — To answer an incoming call, swipe from left to right.

Swipe to stop an alarm — To stop a sounding alarm, swipe from left to right. To

snooze the alarm, swipe from right to left.

Scroll

To scroll up or down in lists that have a scroll bar, drag the slider of the scroll bar.

In some list views, you can scroll by placing your finger or stylus on a list item and

dragging up or down. To scroll through contacts, place your finger or stylus on a

contact, and drag up or down.

Tip: To view a brief description of an icon, place your finger or stylus on the

icon. Descriptions are not available for all icons.

Touch screen backlight

The touch screen backlight is turned off after a period of inactivity. To turn the screen

backlight on, tap the screen.

If the touch screen and keys are locked, tapping the screen does not turn the screen

backlight on. To unlock the screen and keys, slide the lock switch.

Get started

Media key

To open applications such as the music player or browser,

select the media key (

) to open the media bar, and

select the application.

Change the ringing tone

Select Menu > Settings and Personal > Profiles.

You can use profiles to set and customise the ringing tones, message alert tones,

and other tones for different events, environments, or caller groups. To personalise

a profile, go to the profile, and select Options > Personalise.

Nokia support

To find the latest version of this guide, additional information, downloads, and

services related to your Nokia product, see www.nokia.com/support or your local

Nokia website.

Configuration settings service

To download configuration settings such as MMS, GPRS, e-mail, and other services

for your phone model, see www.nokia.com/support.

Get started

Nokia Care services

If you need to contact Nokia Care services, check the list of local

Nokia Care contact centres at www.nokia.com/customerservice.

Maintenance

For maintenance services, find your nearest Nokia Care point at www.nokia.com/

repair.

3. Your device

Phone setup

When you switch on your device for the first time, the Phone setup application is

displayed.

To access the Phone setup application later, select Menu > Applications > Phone

setup.

To set up the device connections, select Sett. wizard.

To transfer data to your device from a compatible Nokia device, select Switch.

The available options may vary.

Copy contacts or pictures from your old device

Want to copy important information from your previous compatible Nokia device

and start using your new device quickly? Use the Phone switch application to copy,

for example, contacts, calendar entries, and pictures to your new device, free of

charge.

Select Menu > Applications > Phone setup and Data transfer.

Your device

If your old Nokia device does not have the Phone

switch application, your new device sends it in a

message. Open the message in the old device, and

follow the instructions.

1. Select the device you want to connect to, and pair

the devices. Bluetooth needs to be activated.

2. If the other device requires a passcode, enter the

passcode. The passcode, which you can define

yourself, must be entered in both devices. The

passcode in some devices is fixed. For details, see

the user guide of the device.

The passcode is valid only for the current

connection.

3. Select the content and OK.

Display indicators

The device is being used in a GSM network (network service).

The device is being used in a UMTS network (network service).

You have one or more unread messages in the Inbox folder in Messaging.

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the Outbox folder.

You have missed calls.

The ringing type is set to Silent, and the message and e-mail alert tones are

turned off.

A timed profile is active.

The touch screen and keys are locked.

A clock alarm is active.

Your device

The second phone line is being used (network service).

All calls to the device are diverted to another number (network service). If

you have two phone lines, a number indicates the active line.

A compatible headset is connected to the device.

A compatible text phone is connected to the device.

A GPRS packet data connection is active (network service). indicates that the

connection is on hold and

that a connection is available.

A packet data connection is active in a part of the network that supports EGPRS

(network service).

indicates that the connection is on hold and that a

connection is available. The icons indicate that EGPRS is available in the network,

but your device is not necessarily using an EGPRS connection to transfer data.

A UMTS packet data connection is active (network service). indicates that the

connection is on hold and

that a connection is available.

High-speed downlink packet access (HSDPA) is supported and active (network

service).

indicates that the connection is on hold and that a connection is

available.

Bluetooth connectivity is on.

Data is being transmitted using Bluetooth connectivity. When the indicator is

blinking, your device is trying to connect with another device.

A USB connection is active.

Synchronisation is in progress.

Contacts bar

To add a contact to the home screen, in the home screen, select > Options >

New contact, and follow the instructions.

To communicate with a contact, select the contact and from the following:

Call

the contact.

Send a message to the contact. Refresh the contact's web feeds.

Your device

To view past communication events with a contact, select the contact. To view the

details of a communication event, select the event.

To close the view, select Options > Exit.

Antenna locations

Your device may have internal and external antennas. Avoid touching the antenna

area unnecessarily while the antenna is transmitting or receiving. Contact with

antennas affects the communication quality and may cause a higher power level

during operation and may reduce the battery life.

Cellular antenna

GPS antenna

Bluetooth antenna

Offline profile

The offline profile lets you use the device without connecting to the wireless cellular

network. When the offline profile is active, you can use your device without a SIM

card.

Activate the offline profile — Press the power key briefly, and select Offline.

When you activate the offline profile, the connection to the cellular network is

closed. All radio frequency signals to and from the device to the cellular network

Your device

are prevented. If you try to send messages using the cellular network, they are

placed in the Outbox folder to be sent later.

Important: In the Offline profile you cannot make or receive any calls, or use

other features that require cellular network coverage. Calls may still be possible to

the official emergency number programmed into your device. To make calls, you

must first activate the phone function by changing profiles. If the device has been

locked, enter the lock code.

Shortcuts

To switch between open applications, press and hold the menu key. Leaving

applications running in the background increases the demand on battery power

and reduces the battery life.

To start a web connection (network service), in the dialler, tap and hold 0.

To access applications available in the media bar, such as the music player and web

browser, in any view, press the media key.

To change the profile, press the power key, and select a profile.

To call your voice mailbox (network service), in the dialler, tap and hold 1.

To open a list of last dialled numbers, in the home screen, press the call key.

To use voice commands, in the home screen, press and hold the call key.

Volume and loudspeaker control

To adjust the volume level when you have an active call or are listening to a sound

clip, use the volume key.

Your device

The built-in loudspeaker allows you to speak and listen from a short distance

without having to hold the device to your ear.

To use the loudspeaker during a call, select Loudspeaker.

To turn off the loudspeaker, select Activate handset.

Sensor settings and display rotation

When you activate the sensors in your device, you can control certain functions by

turning the device.

Select Menu > Settings and Phone > Sensor settings.

Select from the following:

● Sensors — Activate the sensors.

● Turning control — Select Silencing calls and Snoozing alarms to mute calls

and snooze alarms by turning your device so that the display faces down. Select

Auto-rotate display to rotate the display content automatically when you turn

the device on its left side or back to a vertical position. Some applications and

features may not support rotating the display content.

Remote lock

To prevent unauthorised use of your device, you can lock your device and memory

card remotely using a text message. You must define the message text, and to lock

your device, send that text message to your device. To unlock your device, you need

the lock code.

To enable remote locking and to define the text message content to be used, select

Menu > Settings and Phone > Phone mgmt. > Security settings > Phone

and SIM card > Remote phone locking > Enabled. Tap the text input field to

enter the text message content (5 to 20 characters), select

, and verify the

message. Enter the lock code.

Your device

Headset

You can connect a compatible headset or compatible headphones to your device.

You may need to select the cable mode.

Warning: When you use the headset, your ability to

hear outside sounds may be affected. Do not use the headset

where it can endanger your safety.

Do not connect products that create an output signal as this

may cause damage to the device. Do not connect any voltage

source to the Nokia AV Connector.

When connecting any external device or any headset, other

than those approved by Nokia for use with this device, to the

Nokia AV Connector, pay special attention to volume levels.

Attach a wrist strap

Tip: Attach the plectrum stylus to the

device as you would a wrist strap.

Your device

Remove the SIM card

1. Remove the back cover by lifting

it from the top end of the device.

2. Remove the battery.

3. Open the cover of the SIM card

slot. Place the tip of the stylus in

the opening under the battery,

and push the SIM card sideways

to slide it out of the slot. Pull the

SIM card out.

4. Replace the battery and the back cover.

Remove the memory card

Important: Do not remove the memory card during an operation when the

card is being accessed. Doing so may damage the memory card and the device, and

corrupt data stored on the card.

1. If the device is switched on, before you remove the card, press the power key,

and select Remove memory card.

2. When Remove memory card? Some applications will be closed. is displayed,

select Yes.

3. When Remove memory card and press 'OK' is displayed, open the cover of the

memory card slot.

Your device

4. Press the memory card to release it from the slot.

5. Pull out the memory card. If the device is switched on, select OK.

4. Make calls

Touch screen during calls

Your device has a proximity sensor. To extend battery life and prevent accidental

selections, the touch screen is disabled automatically during calls, when you place

the device next to your ear.

Do not cover the proximity sensor, for example, with

protective film or tape.

Calls

1. In the home screen, select Telephone to open the dialler, and enter the phone

number, including the area code. To remove a number, select

For international calls, select * twice for the + character (which replaces the

international access code), and enter the country code, area code (omit the

leading zero if necessary), and phone number.

2. To make the call, press the call key.

3. To end the call (or to cancel the call attempt), press the end key.

Pressing the end key always ends a call, even if another application is active.

To make a call from the contacts list, select Menu > Contacts. Go to the desired

name. Or, select the search field, enter the first letters or characters of the name,

and go to the name. To call the contact, press the call key. If you have saved several

numbers for a contact, select the desired number from the list, and press the call

key.

Make calls

During a call

To mute or unmute the microphone, select or .

To put a call on hold or activate the held call, select

or .

To switch back to the handset, select

To end the call, select

To switch between the active and held calls, select Options > Swap.

Tip: When you have only one active voice call, to put the call on hold, press

the call key. To activate the held call, press the call key again.

To send DTMF tone strings (for example, a password), select Options > Send

DTMF. Enter the DTMF string or search for it in the contacts list. To enter a wait

character (w) or a pause character (p), press * repeatedly. To send the tone, select

OK. You can add DTMF tones to the phone number or DTMF field in contact details.

To end an active call and replace it by answering the waiting call, select Options >

Replace.

To end all your calls, select Options > End all calls.

Many of the options that you can use during a voice call are network services.

Voice mailbox

To call your voice mailbox (network service), in the home screen, select

Telephone, and select and hold 1.

1. To change the phone number of your voice mailbox, select Menu > Settings

and Calling > Call mailbox, a mailbox, and Options > Change number.

2. Enter the number (obtained from your network service provider), and select

OK.

Make calls

Answer or reject a call

To answer a call, press the call key.

To mute the ringing tone of an incoming call, select

You can send a text message without rejecting the call, informing the caller that

you cannot answer the call. To send the reply message, select Send msg., edit the

message text, and press the call key.

If you do not want to answer a call, press the end key. If you activate the Call

divert > Voice calls > If busy function in phone settings to divert calls, rejecting

an incoming call also diverts the call.

To activate the text message option and write a standard reply message, select

Menu > Settings and Calling > Call > Reject call with message, and Message

text.

Make a conference call

Your device supports conference calls between a maximum of six participants,

including yourself.

1. Make a call to the first participant.

2. To make a call to another participant, select Options > New call. The first call

is put on hold.

3. When the new call is answered, to join the first participant in the conference

call, select

To add a new person to the call, make a call to another participant, and add the

new call to the conference call.

To have a private conversation with one of the participants, select

Go to the participant, and select

. The conference call is put on hold on your

device. The other participants can still continue the conference call.

To return to the conference call, select

To drop a participant, select

, go to the participant, and select .

Make calls

4. To end the active conference call, press the end key.

Speed dial a phone number

To activate speed dialling, select Menu > Settings and Calling > Call > Speed

dialling.

1. To assign a phone number to one of the number keys, select Menu > Settings

and Calling > Speed dialling.

2. Go to the key to which you want to assign the phone number, and select

Options > Assign.

1 is reserved for the voice mailbox.

To call in the home screen, select Telephone and the assigned key, and press the

call key.

To call in the home screen when speed dialling is active, select Telephone, and

select and hold the assigned key.

Call waiting

You can answer a call when you have another call in progress.

To activate call waiting (network service), select Menu > Settings and Calling >

Call > Call waiting.

1. To answer the waiting call, press the call key. The first call is put on hold.

2. To switch between the two calls, select Options > Swap.

3. To connect a call on hold with an active call, and to disconnect yourself from the

calls, select Options > Transfer.

4. To end the active call, press the end key.

5. To end both calls, select Options > End all calls.

Make calls

Voice dialling

Your device automatically creates a voice tag for the contacts. To listen to the

synthesised voice tag, select a contact and Options > Voice tag details. Scroll to

a contact detail, and select Options > Play voice tag.

Make a call with a voice tag

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialling in all circumstances.

When you use voice dialling, the loudspeaker is in use. Hold the device at a short

distance away when you say the voice tag.

1. To start voice dialling, in the home screen, press and hold the call key. If a

compatible headset with the headset key is attached, press and hold the headset

key to start voice dialling.

2. A short tone sounds, and Speak now is displayed. Say clearly the name that is

saved for the contact.

3. The device plays a synthesised voice tag for the recognised contact in the

selected device language, and displays the name and number. To cancel the

voice dialling, select Quit.

If several numbers are saved for a name, you can say also the name and the number

type, such as mobile or telephone.

Video sharing

Use video sharing (network service) to send live video or a video clip from your

mobile device to another compatible mobile device during a voice call.

The loudspeaker is active when you activate video sharing. If you do not want to

use the loudspeaker for the voice call while you share video, you can also use a

compatible headset.

Make calls

Warning: Continuous exposure to high volume may damage your hearing.

Listen to music at a moderate level, and do not hold the device near your ear when

the loudspeaker is in use.

Video sharing requirements

Video sharing requires a UMTS connection. Your ability to use video sharing depends

on the availability of the UMTS network. For more information on the service, UMTS

network availability, and fees associated with using this service, contact your

service provider.

To use video sharing, ensure the following:

● Your device is set up for person-to-person connections.

● You have an active UMTS connection and are within UMTS network coverage. If

you move outside the UMTS network during a video sharing session, the sharing

stops while your voice call continues.

● Both the sender and recipient are registered to the UMTS network. If you invite

someone to a sharing session and the recipient’s device is not within UMTS

network coverage or does not have video sharing installed or person-to-person

connections set up, the recipient does not receive invitations. You receive an

error message that indicates that the recipient cannot accept the invitation.

Settings

To set up video sharing, you need person-to-person and UMTS connection settings.

Person-to-person connection settings

A person-to-person connection is also known as a Session Initiation Protocol (SIP)

connection. The SIP profile settings must be configured in your device before you

can use video sharing. Ask your service provider for the SIP profile settings, and save

them to your device. Your service provider may send you the settings or give you a

list of the needed parameters.

To add a SIP address to a contact:

1. Select Menu > Contacts.

Make calls

2. Open the contact or create a new contact.

3. Select Options > Edit.

4. Select Options > Add detail > Share video.

5. Enter the SIP address in the format username@domainname (you can use an IP

address instead of a domain name).

If you do not know the SIP address for the contact, you can use the phone number

of the recipient, including the country code, to share video (if supported by the

network service provider).

UMTS connection settings

To set up your UMTS connection:

● Contact your service provider to establish an agreement for you to use the UMTS

network.

● Ensure that the UMTS access point connection settings for your device are

configured properly. For more information about the settings, contact your

service provider.

Share live video or video clips

During an active voice call, select Options > Share video.

1. To share live video during the call, select Live video.

To share a video clip, select Video clip and the clip you want to share.

You may need to convert the video clip into a suitable format to be able to share

it. If your device notifies you that the video clip must be converted, select OK.

Your device must have a video editor for the conversion to work.

2. If the recipient has several SIP addresses or phone numbers including the

country code saved in Contacts, select the desired address or number. If the SIP

address or phone number of the recipient is not available, enter the address or

number of the recipient including the country code, and select OK to send the

invitation. Your device sends the invitation to the SIP address.

Sharing begins automatically when the recipient accepts the invitation.

Make calls

Options during video sharing

or to mute or unmute the microphone

or to switch the loudspeaker on and off

or to pause and resume video sharing

to switch to full screen mode (available for receiver only)

3. To end the sharing session, select Stop. To end the voice call, press the end key.

When you end the call, video sharing also ends.

To save the live video you shared, select Yes when prompted. The device notifies

you of the location of the saved video.

If you access other applications while you are sharing a video clip, the sharing is

paused. To return to the video sharing view and to continue sharing, in the home

screen, select Options > Resume video sharing.

Accept an invitation

When someone sends you a video sharing invitation, the invitation message

displays the sender’s name or SIP address.

If someone sends you a sharing invitation and you are not within 3G network

coverage, you will not know that you received an invitation.

When you receive an invitation, select from the following:

● Yes — Accept the invitation, and activate the sharing session.

● No — Reject the invitation. The sender receives a message that you rejected the

invitation. You can also press the end key to reject the invitation and end the

voice call.

To end the sharing session, select Stop. To end the voice call, press the end key.

When you end the call, video sharing also ends.

Make calls

Log

The Log application stores information about the communication history of the

device. The device registers missed and received calls only if the network supports

these functions, and the device is switched on and within the network service area.

Recent calls

Select Menu > Log and Recent calls.

To view missed, received, and dialled calls, select Missed calls, Received calls or

Dialled numbers.

Tip: To open the dialled numbers list in the home screen, press the call key.

On the toolbar, select from the following:

●

Call — Call the desired contact.

●

Create message — Send a message to the desired contact.

●

Open Contacts — Open the contacts list.

Select Options and from the following:

● Save to Contacts — Save the highlighted phone number from a recent calls list

to your contacts.

● Clear list — Clear the selected recent calls list.

● Delete — Clear a highlighted event in the selected list.

● Settings — Select Log duration and the length of time that the communication

information is saved in the log. If you select No log, no information is saved in

the log.

Packet data

Select Menu > Log.

You may be charged for your packet data connections by the amount of data sent

and received. To check the amount of data sent or received during packet data

connections, select Data counter > All sent dataor All received data.

Make calls

To clear both sent and received information, select Options > Clear counters. You

need the lock code to clear the information.

Call duration

Select Menu > Log.

To view the approximate duration of your last call, and dialled and received calls,

select Call duration.

Monitor all communication events

Select Menu > Log.

To open the general log where you can monitor all voice calls, text messages, or

data connections registered by the device, select the general log tab

Subevents, such as a text message sent in more than one part and packet data

connections, are logged as one communication event. Connections to your mailbox,

multimedia message centre, or web pages are shown as packet data connections.

To view how much data was transferred and how long a certain packet data

connection lasted, scroll to an incoming or outgoing event indicated by GPRS, and

select Options > View.

To copy a phone number from the log to the clipboard, and paste it into a text

message, for example, select Options > Use number > Copy.

To filter the log, select Options > Filter and a filter.

To set the log duration, select Options > Settings > Log duration. If you select

No log, all the log contents, recent calls register, and messaging delivery reports

are permanently deleted.

5. Write text

You can enter letters, numbers, and special characters in several different ways. The

on-screen keyboards allow you to enter characters by tapping them with your

fingers or the stylus. Handwriting recognition allows you to write characters directly

Write text

onto the screen using the stylus as a pen. Handwriting recognition may not be

available for all languages.

Tap any text input field to enter letters, numbers, and special characters.

Your device can complete words based on the built-in dictionary for the selected

text input language. The device also learns new words from your input.

Virtual keyboard

You can use the virtual keyboard in landscape mode.

To activate the virtual keyboard, select

> Full screen QWERTY.

When using the virtual keyboard in full screen mode, you can select keys with your

fingers.

1 — Close - Close the virtual keyboard.

2 — Input menu - Open the touch input options menu to access commands such as

Writing language. To add an emoticon, select Insert emoticon.

3 — Virtual keyboard

4 — Shift and caps lock - To enter an uppercase character when writing in lowercase,

or vice versa, select the key before entering the character. To activate the caps lock,

select the key twice. A line under the key indicates that the caps lock is activated.

5 — Letters

6 — Numbers and special characters

7 — Character accents

8 — Space bar

Write text

9 — Move - Move the cursor.

10 — Backspace

11 — Enter - Move the cursor to the next row or text input field. Additional functions

are based on the current context (for example, in the web address field of the web

browser, it acts as the Go icon).

12 — Input mode - Select the input method. When you tap an item, the current

input method view closes, and the selected one opens.

Handwriting

The input methods and languages supported by the handwriting recognition vary

by region and may not be available for all languages.

To activate handwriting mode, select

> Handwriting.

Write legible, upright characters on the text input area, and leave a space between

each character.

To teach the device your handwriting style, select

> Handwriting training.

This option is not available for all languages.

To enter letters and numbers (default mode), write words as you would normally.

To select number mode, select

. To enter non-Latin characters, select the

corresponding icon, if available.

To enter special characters, write them as you would

normally, or select

and the desired character.

To delete characters or move the cursor back, swipe

backwards (see Figure 1).

To insert a space, swipe forwards (see Figure 2).

Write text

Enter text with the virtual keypad

Virtual keypad

With the virtual keypad (Alphanumeric keypad), you can enter characters like you

would with a traditional physical keypad with numbers on the keys.

1 — Close - Closes the virtual keypad (Alphanumeric keypad).

2 — Input menu - Opens the touch input menu, which includes commands such as

Activate predictive text and Writing language. To add an emoticon, select Insert

emoticon.

3 — Text input indicator - Opens a pop-up window, in which you can activate or

deactivate predictive text input modes, change the character case, and switch

between letter and number modes.

4 — Input mode - Opens a pop-up window, in which you can select the input mode.

When you tap an item, the current input method view closes, and the selected one

Write text

opens. The availability of input modes may vary depending on whether the

automatic input mode (sensor settings) is activated or not.

5 — Arrow keys - Scroll left or right.

6 — Backspace

7 — Numbers

8 — Star - Opens a special characters table.

9 — Shift - Changes the character case, activates or deactivates predictive text input

modes, and switches between letter and number modes.

Traditional text input

Tap a number key (1-9) repeatedly until the desired character appears. There are

more characters available for a number key than are visible on the key.

If the next letter is located on the same key as the present one, wait until the cursor

appears (or move the cursor forward to end the time-out period), and enter the

letter.

To insert a space, tap 0. To move the cursor to the next line, tap 0 three times.

Predictive text input

With predictive text input, to enter a word, select one number key for each letter

in the word. Predictive text input is based on a built-in dictionary to which you can

add new words. Predictive text input is not available for all languages.

1. To activate predictive text input for all editors on the device, select

Activate prediction.

2. Write a word. For example, to write "Nokia" when the English dictionary is

selected, select 6 for N, 6 for o, 5 for k, 4 for i, and 2 for a.

The word suggestion changes after each key selection.

3. If the word is not correct, select * repeatedly, until the correct match is displayed.

If the word is not in the dictionary, select Spell, enter the word using traditional

text input mode, and select OK.

Write text

If ? is displayed after the word, the word is not in the dictionary. To add a word

to the dictionary, select *, enter the word using traditional text input mode, and

select OK.

4. To insert a punctuation mark, select *.

5. To insert a space, select 0.

Touch input settings

Select Menu > Settings and Phone > Touch input.

To modify text input settings for the touch screen, select from the following:

● Handwriting training — Open the handwriting training application. Train the

device to recognise your handwriting better. This option is not available in all

languages.

● Writing language — Define which language-specific characters in your

handwriting are recognised and how the virtual keyboard is laid out.

● Writing speed — Select the writing speed.

● Guiding line — Display or hide the guiding line in the writing area. The guiding

line helps you write in a straight line, and it also helps the device recognise your

writing.

● Pen trail width — Select the pen trail width for the text written with the stylus.

● Writing colour — Select the colour of the text written with the stylus.

● Adaptive search — Activate adaptive search.

● Touch screen calibration — Calibrate the touch screen.

6. Contacts

You can save and update contact information, such as phone numbers, home

addresses, or e-mail addresses of your contacts. You can add a personal ringing tone

or a thumbnail image to a contact. You can also create contact groups, which allow

you to send text messages or e-mail to many recipients at the same time.

To open the contacts list, in the home screen, depending on the home screen theme,

select Contacts or

Contacts

Save and edit names and numbers

1. To add a new contact to the contacts list, select .

2. Tap a field to enter the information in the field. To close the text input, select

. Fill in the fields that you want, and select Done.

To edit contacts, select a contact and Options > Edit.

Contacts toolbar

On the contacts list toolbar, select from the following:

●

Call — Call the desired contact.

●

Create message — Send a message to the desired contact.

●

New contact — Create a new contact.

Manage names and numbers

To copy or delete a contact, or to send a contact as a business card to another device,

tap and hold a contact, and select Copy, Delete, or Send business card.

To delete several contacts at the same time, select Options > Mark/Unmark to

mark the desired contacts, and to delete, select Options > Delete.

To listen to the voice tag assigned to a contact, select the contact and Options >

Voice tag details > Options > Play voice tag.

Before using voice tags, note the following:

● Voice tags are not language-dependent. They are dependent on the speaker's

voice.

● You must say the name exactly as you said it when you recorded it.

● Voice tags are sensitive to background noise. Record voice tags and use them in

a quiet environment.

● Very short names are not accepted. Use long names, and avoid similar names for

different numbers.

Contacts

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialling in all circumstances.

Default numbers and addresses

You can assign default numbers or addresses to a contact. If a contact has several

numbers or addresses, you can easily call or send a message to a certain number or

address. The default number is also used in voice dialling.

1. In the contacts list, select a contact.

2. Select Options > Defaults.

3. Select a default to which you want to add a number or an address, and select

Assign.

4. Select a number or an address you want to set as a default.

5. To exit the Defaults view and save the changes, tap outside the view.

Ringing tones, images, and call text for contacts

You can define a ringing tone for a contact or group, and an image and a call text

for a contact. When the contact calls you, the device plays the selected ringing tone

and shows the call text or image (if the caller’s phone number is sent with the call

and your device recognises it).

To define a ringing tone for a contact or a contact group, select the contact or contact

group and Options > Ringing tone, and a ringing tone.

To define a call text for a contact, select the contact and Options > Add call alert

text. Tap the text field to enter the call text, and select

To add an image for a contact saved in the device memory, select the contact,

Options > Add image, and an image from Gallery.

To remove the ringing tone, select Default tone from the list of ringing tones.

Contacts

To view, change or remove the image from a contact, select the contact, Options >

Image, and the desired option.

Copy contacts

When you open the contacts list for the first time, the device asks if you want to

copy names and numbers from the SIM card to your device.

To start copying, select Yes.

If you do not want to copy the contacts from the SIM card to your device, select

No. The device asks if you want to view the SIM card contacts in the contacts

directory. To view the contacts, select Yes. The contacts list opens, and the names

stored on your SIM card are indicated with

SIM services

For availability and information on using SIM card services, contact your SIM card

vendor. This may be the network service provider or other vendor.

SIM contacts

To set the names and numbers stored on the SIM card to be shown on the contacts

list, select Options > Settings > Contacts to display > SIM memory. You can

add and edit SIM contacts, or call them.

The numbers you save in the contacts list may not be automatically saved to your

SIM card. To save numbers to the SIM card, select a contact and Options > Copy >

SIM memory.

To select whether the new contacts you enter are saved to your device or your SIM

card, select Options > Settings > Default saving memory > Phone memory

or SIM memory.

Fixed dialling

Select Menu > Contacts and Options > SIM numbers > Fixed dial contacts.

Contacts

With the fixed dialling service, you can restrict calls from your device to certain

phone numbers. Not all SIM cards support the fixed dialling service. For more

information, contact your service provider.

When security features that restrict calls are in use (such as call barring, closed user

group, and fixed dialling), calls may be possible to the official emergency number

programmed into your device. Call barring and call diverting cannot be active at the

same time.

You need your PIN2 code to activate and deactivate fixed dialling or edit your fixed

dialling contacts. Contact your service provider for your PIN2 code.

Select Options and from the following:

● Activate fixed dialling — Activate the fixed dialing.

● Deactivate fixed dialling — Deactivate the fixed dialing.

● New SIM contact — Enter the contact name and phone number to which calls

are allowed.

● Add from Contacts — Copy a contact from the list of contacts to the fixed dialling

list.

To send text messages to the SIM contacts while the fixed dialling service is active,

you need to add the text message centre number to the fixed dialling list.

7. Messaging

Messaging main view

Select Menu > Messaging (network service).

To create a new message, select New message.

Tip: To avoid rewriting messages that you send often, use texts in the

Templates folder in My folders. You can also create and save your own

templates.

Messaging contains the following folders:

Messaging

● Inbox — Received messages, except e-mail and cell broadcast messages,

are stored here.

●

My folders — Organise your messages into folders.

●

Mailbox — Connect to your remote mailbox to retrieve your new e-mail

messages, or view your previously retrieved e-mail messages offline.

●

Drafts — Draft messages that have not been sent are stored here.

●

Sent — The last messages that have been sent, excluding messages sent

using Bluetooth connectivity, are stored here. You can change the number of

messages to save in this folder.

●

Outbox — Messages waiting to be sent are temporarily stored in the outbox,

for example, when your device is outside network coverage.

●

Delivery reports — You can request the network to send you a delivery

report of the text messages and multimedia messages you have sent (network

service).

Write and send messages

Select Menu > Messaging.

Important: Exercise caution when opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

Before you can create a multimedia message or write a mail, you must have the

correct connection settings defined.

The wireless network may limit the size of MMS messages. If the inserted picture

exceeds this limit, the device may make it smaller so that it can be sent by MMS.

Only devices that have compatible features can receive and display multimedia

messages. The appearance of a message may vary depending on the receiving

device.

Check the size limit of mail messages with your service provider. If you attempt to

send a mail message that exceeds the size limit of the mail server, the message is

left in the Outbox folder, and the device attempts to resend it periodically. Sending

Messaging

a mail requires a data connection, and continuous attempts to resend the mail may

incur charges from your service provider. In the Outbox folder, you can delete such

a message or move it to the Drafts folder.

Messaging requires network services.

Send a text or multimedia message — Select New message.

Send an audio or mail message — Select Options > Create message, and the

relevant option.

Select recipients or groups from the contacts list — Select

from the toolbar.

Enter the number or mail address manually — Tap the To field.

Enter the subject of the mail or multimedia message — Enter it in the Subject

field. If the Subject field is not visible, select Options > Message header fields to

change the fields that are visible.

Write the message — Tap the message field.

Add an object to a message or mail — Select

and the relevant type of content.

The message type may change to multimedia message based on the inserted

content.

Send the message or mail — Select

, or press the call key.

Your device supports text messages beyond the limit for a single message. Longer

messages are sent as two or more messages. Your service provider may charge

accordingly. Characters with accents, other marks, or some language options take

more space, and limit the number of characters that can be sent in a single message.

Messaging inbox

Receive messages

Select Menu > Messaging and Inbox.

In the Inbox folder,

indicates an unread text message, an unread multimedia

message,

an unread audio message, and data received through Bluetooth

connectivity.

Messaging

When you receive a message, and 1 new message are displayed in the home

screen. To open the message, select Show. To open a message in the Inbox folder,

select the message. To reply to a received message, select Options > Reply.

Multimedia messages

Important: Exercise caution when opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

You may receive a notification that a multimedia message is waiting in the

multimedia message centre. To start a packet data connection to retrieve the

message to your device, select Options > Retrieve.

When you open a multimedia message (

), you may see an image and a message.

is shown if sound is included, or if video is included. To play the sound or the

video, select the indicator.

To see the media objects that have been included in the multimedia message, select

Options > Objects.

If the message includes a multimedia presentation,

is displayed. To play the

presentation, select the indicator.

Data, settings, and web service messages

Your device can receive many kinds of messages that contain data, such as business

cards, ringing tones, operator logos, calendar entries, and e-mail notifications. You

may also receive settings from your service provider in a configuration message.

To save the data from the message, select Options and the corresponding option.

Web service messages are notifications (for example, news headlines) and may

contain a text message or a link. For availability and subscription, contact your

service provider.

Messaging

Set up e-mail

To set up e-mail, select Menu > Messaging and Mailbox.

You can set up several e-mail accounts, for example, a personal e-mail account and

a corporate e-mail account.

To set up e-mail from your home screen, select the relevant plug-in. Alternatively,

to set up an e-mail account, select Menu > Applications > Sett. wizard.

E-mail service

The e-mail service on your Nokia device automatically transfers e-mail from your

existing e-mail address to your device. You can read, respond to, and organise your

e-mails on the go. The service works with a number of internet e-mail providers

that are often used for personal e-mail. Data charges may be applicable when using

the service. For information on possible costs, contact your service provider

Set up e-mail on your Nokia device

1. Select Menu > Applications > Sett. wizard.

2. When the Settings wizard is opened for the first time, you are asked to define

the e-mail settings after the service provider settings. If you have used the

Settings wizard before, select E-mail setup.

3. Accept the terms and conditions to activate the e-mail service.

For more information, see nokia.com/messaging.

Mailbox

Define e-mail settings

Select Menu > Messaging and Mailbox.

To use e-mail, you must have defined a valid internet access point (IAP) in the device

and have defined your e-mail settings correctly.

You must have a separate e-mail account. Follow the instructions given by your

remote mailbox and internet service provider (ISP).

Messaging

If you select Messaging > Mailbox and have not set up your e-mail account, you

are prompted to do so. To start creating the e-mail settings with the mailbox guide,

select Start.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox

in the Messaging main view. You can have up to six mailboxes.

Open the mailbox

Select Menu > Messaging and a mailbox.

When you open the mailbox, the device asks if you want to connect to the mailbox.

To connect to your mailbox and retrieve new e-mail headers or messages, select

Yes. When you view messages online, you are continuously connected to a remote

mailbox using a data connection.

To view previously retrieved e-mail messages offline, select No.

To create a new e-mail message, select Options > Create message > E-mail.

When you are online, to end the data connection to the remote mailbox, select

Options > Disconnect

Retrieve e-mail messages

Select Menu > Messaging and a mailbox.

If you are offline, select Options > Connect to open a connection to the remote

mailbox.

Important: Exercise caution when opening messages. Messages may contain

malicious software or otherwise be harmful to your device or PC.

1. When you have an open connection to a remote mailbox, select Options >

Retrieve e-mail > New to retrieve all new messages, Selected to retrieve only

selected messages, or All to retrieve all messages from the mailbox.

To stop retrieving messages, select Cancel.

Messaging

2. To close the connection and view the e-mail messages offline, select Options >

Disconnect.

3. To open an e-mail message, select the message. If the e-mail message has not

been retrieved and you are offline, you are asked if you want to retrieve this

message from the mailbox.

To view e-mail attachments, open the message, and select the attachment field

indicated by

. If the attachment has not been retrieved to the device, select

Options > Retrieve.

To retrieve e-mail messages automatically, select Options > E-mail settings >

Automatic retrieval.

Setting the device to retrieve e-mail automatically may involve the transmission of

large amounts of data through your service provider's network. Contact your service

provider for information about data transmission charges.

Delete e-mail messages

Select Menu > Messaging and a mailbox.

To delete the contents of an e-mail message from the device while still retaining it

in the remote mailbox, select Options > Delete > Phone only.

The device mirrors the e-mail headers in the remote mailbox. Although you delete

the message content, the e-mail header stays in your device. If you want to remove

the header as well, you must be connected to the server when deleting the message

from your device and the remote mailbox. It there is no connection to the server,

the header is deleted when you make a connection from your device to the remote

mailbox again to update the status.

To delete an e-mail from the device and the remote mailbox, select Options >

Delete > Phone and server.

To cancel deleting an e-mail that has been marked to be deleted from the device

and server during the next connection (

), select Options > Restore.

Messaging

Disconnect from the mailbox

When you are online, to end the data connection to the remote mailbox, select

Options > Disconnect.

Mail for Exchange

With Mail for Exchange, you can receive your work e-mail to your device. You can

read and reply to your e-mails, view and edit compatible attachments, view

calendar information, receive and reply to meeting requests, schedule meetings,

and view, add, and edit contact information.

ActiveSync

Use of the Mail for Exchange application is limited to over-the-air synchronisation

of PIM information between the Nokia device and the authorised Microsoft

Exchange server.

Mail for Exchange can be set up only if your company has Microsoft Exchange Server.

In addition, your company's IT administrator must have activated Mail for Exchange

for your account.

Before starting to set up Mail for Exchange, ensure that you have the following:

● A corporate e-mail ID

● Your office network user name

● Your office network password

● Your network domain name (contact your company's IT department)

● Your Mail for Exchange server name (contact your company's IT department)

Depending on your company's Mail for Exchange server configuration, you may need

to enter other information in addition to those listed. If you do not know the correct

information, contact your company's IT department.

With Mail for Exchange, the use of the lock code may be mandatory. The default lock

code of your device is 12345, but your company's IT administrator may have set a

different one for you to use.

Messaging

You can access and modify the Mail for Exchange profile and settings in the

Messaging settings.

View messages on a SIM card

Select Menu > Messaging and Options > SIM messages.

Before you can view SIM messages, you must copy them to a folder in your device.

1. Select Options > Mark/Unmark > Mark or Mark all to mark messages.

2. Select Options > Copy. A list of folders opens.

3. To start copying, select a folder. To view the messages, open the folder.

Cell broadcast messages

Select Menu > Messaging and Options > Operator messages.

Cell broadcast (network service) allows you to receive messages on various topics,

such as weather or traffic conditions, from your service provider. For available topics

and relevant topic numbers, contact your service provider. This service may not be

available for all regions.

Cell broadcast messages cannot be received in 3G networks. A packet data

connection may prevent cell broadcast reception.

Service commands

Select Menu > Messaging and Options > Service commands.

With service commands (network service) you can enter and send service requests

(also known as USSD commands), such as activation commands for network

services, to your service provider. This service may not be available for all regions.

Messaging

Messaging settings

The settings may be preconfigured in your device, or you may receive them in a

message. To enter settings manually, fill in all fields marked with Must be defined

or an asterisk.

Some or all message centres or access points may be preset for your device by your

service provider, and you may not be able to change, create, edit, or remove them.

Text message settings

Select Menu > Messaging and Options > Settings > Text message.

Select from the following:

● Message centres — View a list of all text message centres that have been

defined.

● Message centre in use — Select which message centre to use to deliver text

messages.

● Character encoding — To use character conversion to another encoding system

when available, select Reduced support.

● Receive report — Select whether the network sends delivery reports on your

messages (network service).

● Message validity — Select how long the message centre resends your message

if the first attempt fails (network service). If the message cannot be sent within

the validity period, the message is deleted from the message centre.

● Message sent as — To learn if your message centre is able to convert text

messages into these other formats, contact your service provider.

● Preferred connection — Select the connection to use.

● Reply via same centre — Select whether you want the reply message to be

sent using the same text message centre number (network service).

Multimedia message settings

Select Menu > Messaging and Options > Settings > Multimedia message.

Select from the following:

Messaging

● Image size — Define the size of the image in a multimedia message.

● MMS creation mode — If you select Guided, the device informs you if you try

to send a message that may not be supported by the recipient. If you select

Restricted, the device prevents you from sending messages that may not be

supported. To include content in your messages without notifications, select

Free.

● Access point in use — Select which access point is used as the preferred

connection.

● Multimedia retrieval — Select how you want to receive messages, if available.

To receive messages automatically in your home network, select Auto in home

netw.. Outside your home network, you receive a notification that there is a

message to retrieve in the multimedia message centre. If you select Always

automatic, your device automatically makes an active packet data connection

to retrieve the message both in and outside your home network. Select Manual

to retrieve multimedia messages from the message centre manually, or Off to

prevent receipt of any multimedia messages. Automatic retrieval may not be

supported in all regions.

● Allow anonymous msgs. — Reject messages from anonymous senders.

● Receive adverts — Receive multimedia message advertisements (network

service).

● Receive reports — Display the status of sent messages in the log (network

service).

● Deny report sending — Prevent your device from sending delivery reports of

received messages.

● Message validity — Select for how long the message centre resends your

message if the first attempt fails (network service). If the message cannot be

sent within this time period, the message is deleted from the message centre.

The device requires network support to indicate that a sent message has been

received or read. Depending on the network and other circumstances, this

information may not always be reliable.

Messaging

E-mail settings

Manage mailboxes

Select Menu > Messaging and Options > Settings > E-mail.

To select which mailbox you want to use to send and receive e-mail, select Mailbox

in use and a mailbox.

To remove a mailbox and its messages from your device, select Mailboxes, tap the

mailbox to be removed if it is not already highlighted, and select Options >

Delete.

To create a new mailbox, select Mailboxes > Options > New mailbox. The name

you give to the new mailbox replaces Mailbox in the Messaging main view. You can

have up to six mailboxes.

Select Mailboxes and a mailbox to change the connection settings, user settings,

retrieval settings, and automatic retrieval settings.

Chat

About Chat

Select Menu > Applications > Chat.

With Chat (network service), you can exchange instant messages with your friends.

If you do not have a chat account, you can create a Nokia account, and use Nokia's

Ovi Chat.

You can leave Chat running in the background while you use other features of your

device, and still be notified of new instant messages.

The Chat application may be preinstalled on your device. If it is not, download and

install it from Nokia's Ovi Store.

Using network services and downloading content to your device may result in data

traffic costs.

Start chatting

Select Menu > Applications > Chat.

Messaging

1. Select the service or services that you want to use to chat, and then select

Continue.

You can sign in to and chat in several services at the same time. You need to

separately sign in to each service.

2. In your contacts list, select the contact you want to chat with.

You can have ongoing conversations with several contacts at the same time.

Get more information — Select the options icon and the appropriate option.

8. Personalise your device

You can personalise your device by changing the home screen, tones, or themes.

Change the look of your device

Select Menu > Settings and Personal > Themes.

You can use themes to change the look of the display, such as wallpaper and main

menu layout.

To change the theme that is used for all the applications in your device, select

General. To preview a theme before activating it, scroll to the theme, and wait for

a few seconds. To activate the theme, select Options > Set. The active theme is

indicated by

To change the layout of the main menu, select Menu.

To change the look of the home screen, select Home scr. theme.

To have a wallpaper image or a slide show of changing images as the background

in the home screen, select Wallpaper > Image or Slide show.

To change the image displayed in the home screen when a call is received, select

Call image.

Personalise your device

Profiles

Select Menu > Settings and Personal > Profiles.

You can use profiles to set and customise the ringing tones, message alert tones,

and other tones for different events, environments, or caller groups. The name of

the selected profile is displayed at the top of the home screen. If the General profile

is in use, only the date is displayed.

To change a profile, scroll to the profile, and select Options > Activate.

To personalise a profile, scroll to the profile, and select Options > Personalise.

Select the setting you want to change.

To set the profile to be active until a certain time within the next 24 hours, scroll to

the profile, select Options > Timed, and set the time. When the time expires, the

profile changes back to the previously active non-timed profile. When the profile is

timed,

is displayed in the home screen. The Offline profile cannot be timed.

To create a new profile, select Options > Create new.

9. Music

Music player

Music player supports file formats such as AAC, AAC+, eAAC+, MP3, and WMA. Music

player does not necessarily support all features of a file format or all the variations

of file formats.

You can also use Music player to listen to podcasts. Podcasting is a method for

delivering audio or video content over the internet using either RSS or Atom

technologies for playback on mobile devices and computers.

Play a song or a podcast

Select Menu > Music > Music player.

1. Select categories to navigate to the song or podcasts you want to hear.

Music

2. To play an item, select the item from the list.

You may have to refresh the music and podcast libraries after you have updated the

song or podcast selection in your device. To add all available items to the library,

select Options > Refresh library.

Some songs contain lyrics. To display the lyrics, select Options > Show lyrics.

To pause playback, select

; to resume, select .

To fast-forward or rewind, select and hold

or .

To go to the next item, select

. To return to the

beginning of the item, select

. To skip to the previous

item, select

again within 2 seconds after a song or

podcast has started.

To activate or deactivate random play (

), select

Options > Shuffle play.

To repeat the current item (

), all items ( ), or to

deactivate repeat, select Options > Repeat.

If you play podcasts, shuffle and repeat are

automatically deactivated.

To adjust the volume, press the volume key.

To modify the tone of the music playback, select

Options > Equaliser.

To modify the balance and stereo image or to enhance

the bass, select Options > Settings.

To return to the home screen and leave the player

playing in the background, press the end key.

To close the player, select Options > Exit.

Music

Playlists

Select Menu > Music > Music player and Playlists.

To view details of the playlist, select Options > Playlist details.

Create a playlist

1. Select Options > New playlist.

2. Enter a name for the playlist, and select OK.

3. To add songs now, select Yes; or to add the songs later, select No.

4. If you select Yes, select artists to find the songs you want to add to the playlist.

Select Add to add items.

To show the song list under an artist title, select Expand. To hide the song list,

select Collapse.

5. When you have made your selections, select Done.

If a compatible memory card is inserted, the playlist is saved to the memory

card.

To add more songs later, when viewing the playlist, select Options > Add songs.

To add songs, albums, artists, genres, and composers to a playlist from the different

views of the music menu, select an item and Options > Add to playlist > Saved

playlist or New playlist.

To remove a song from a playlist, select Options > Remove. This does not delete

the song from the device; it only removes it from the playlist.

To reorder songs in a playlist, select the song you want to move and Options >

Reorder playlist. Move the song to the desired position, and select Drop. To move

another song, select the song and Grab, move the song to the desired position, and

select Drop. To finish reordering the playlist, select Done.

Podcasts

Select Menu > Music > Music player and Podcasts.

Music

Podcast episodes have three states: never played, partially played, and completely

played. If the state is partially played, the episode plays from the last playback

position the next time it is played. If the state is never played or completely played,

the episode plays from the beginning.

Transfer music from a computer

You can use the following methods to transfer music:

● To install Nokia Ovi Player to manage and organise your music files, download

the PC software from www.ovi.com, and follow the instructions.

● To view your device on a computer as a mass memory device where you can

transfer any data files, make the connection with a compatible USB data cable

or Bluetooth connectivity. If you are using a USB data cable, select Mass storage

as the connection mode. A compatible memory card must be inserted in the

device.

● To synchronise music with Windows Media Player, connect a compatible USB data

cable, and select Media transfer as the connection mode. A compatible memory

card must be inserted in the device.

To change the default USB connection mode, select Menu > Settings and

Connectivity > USB > USB connection mode.

Nokia Ovi Player

With Nokia Ovi Player, you can download music from Ovi Music, transfer your music

to your device from your computer, and manage and organise your music files. To

download Nokia Ovi Player, go to www.ovi.com.

You need an internet connection to download music.

Download, transfer, and manage music between your computer and

mobile device

1. Open Nokia Ovi Player on your computer. If you want to download music,

2. Connect your device to the computer with a compatible USB data cable.

Music

3. To select the connection mode on your device, select Media transfer.

Ovi Music

With Ovi Music (network service), you can search, browse, buy, and download music

to your device.

Select Menu > Music > Ovi Music.

To download music, you first need to register for the service.

Downloading music may involve additional costs and the transmission of large

amounts of data (network service). For information about data transmission

charges, contact your network service provider.

To access Ovi Music, you must have a valid internet access point in the device. You

may be asked to select the access point to use when connecting to Ovi Music.

Select the access point — Select Default access point.

The availability and appearance of Ovi Music settings may vary. The settings may

also be predefined and you may not be able to modify them. When browsing Ovi

Music, you may be able to modify the settings.

Modify Ovi Music settings — Select Options > Settings.

Ovi Music is not available for all countries or regions.

Nokia Podcasting

With the Nokia Podcasting application (network service), you can search, discover,

subscribe to, and download podcasts over the air, and play, manage, and share

audio and video podcasts with your device.

Podcasting settings

To open Nokia Podcasting, select Menu > Music > Podcasting.

Before using Nokia Podcasting, define your connection and download settings.

Music

Check with your service provider for terms and data service fees before using

different connection methods. For example, a flat rate data plan can allow large

data transfers for one monthly fee.

Connection settings

To edit the connection settings, select Options > Settings > Connection and

from the following:

● Default access point — Select the access point to define your connection to the

internet.

● Search service URL — Define the podcast search service URL to be used in

searches.

Download settings

To edit the download settings, select Options > Settings > Download and from

the following:

● Save to — Define the location where you want to save your podcasts.

● Update interval — Define how often podcasts are updated.

● Next update date — Define the date of the next automatic update.

● Next update time — Define the time of the next automatic update.

Automatic updates only occur if a specific default access point is selected and

Nokia Podcasting is running. If Nokia Podcasting is not running, the automatic

updates are not activated.

● Download limit (%) — Define the percentage of memory that is reserved for

podcast downloads.

● If limit exceeds — Define what to do if the downloads exceed the download

limit.

Setting the application to retrieve podcasts automatically may involve the

transmission of large amounts of data through your service provider’s network.

Contact your service provider for information about data transmission charges.

To restore the default settings, select Options > Restore default in the settings

view.

Music

Downloads

After you have subscribed to a podcast, from directories, search, or by entering a

web address, you can manage, download, and play episodes in Podcasts.

To see the podcasts you have subscribed to, select Podcasting > Podcasts.

To see individual episode titles (an episode is a particular media file of a podcast),

select the podcast title.

To start a download, select the episode title. To download or to continue to

download selected or marked episodes, select Options > Download. You can

download multiple episodes at the same time.

To play a portion of a podcast during download or after partial downloading, select

the podcast and Options > Play preview.

Fully downloaded podcasts can be found in the Podcasts folder, but are not shown

until the library is refreshed.

Radio

Listen to the radio

Select Menu > Music > Radio.

The FM radio depends on an antenna other than the wireless device antenna. A

compatible headset or accessory needs to be attached to the device for the FM radio

to function properly.

When you open the application for the first time, you can choose to have the local

stations tuned automatically.

To listen to the next or the previous station, select

or .

To mute the radio, select

Select Options and from the following:

● Stations — View saved radio stations.

● Tune stations — Search for radio stations.

● Save — Save the radio station.

Music

● Activate loudspeaker or Deactivate loudspeaker — Turn the loudspeaker on

or off.

● Alternative frequencies — Select whether you want the radio to automatically

search for a better RDS frequency for the station if the frequency level becomes

low.

● Play in background — Return to the home screen with the radio playing in the

background.

Manage radio stations

Select Menu > Music > Radio.

To listen to saved stations, select Options > Stations, and select a station from

the list.

To remove or rename a station, select Options > Stations > Options > Delete

or Rename.

To set the desired frequency manually, select Options > Tune stations >

Options > Manual tuning.

Internet radio

About Internet radio

Select Menu > Music > Internet radio.

With the Internet radio (network service), you can listen to radio stations that

broadcast on the internet.

You must have a packet data access point (GPRS or 3G) defined in your device.

Using a packet data connection to listen to an internet radio station may involve

the transmission of large amounts of data through your service provider's network.

For information about data transmission charges, contact your service provider.

Listen to internet radio stations

Select Menu > Music > Internet radio.

Music

To listen to a radio station on the internet, do the following:

1. Select a station from your favourites or the station directory, or search for

stations by name from the Nokia Internet Radio service.

To add a station manually, select Options > Add station manually. You can

also browse for station links with the Web browser application. Compatible links

are automatically opened in the Internet Radio application.

2. Select Options > Listen.

The Now playing view opens, displaying information about the currently playing

station and song.

To pause the playback, press the scroll key; to resume, press the scroll key again.

To view station information, select Options > Station information (not available

if you have saved the station manually).

If you are listening to a station saved in your favourites, scroll left or right to listen

to the previous or next saved station.

Station directory

Select Menu > Music > Internet radio and Station directory.

The station directory is maintained by Nokia. If you want to listen to internet radio

stations outside the directory, add station information manually or browse for

station links on the internet with the Web browser application.

Select from the following:

● Browse by genre — View the available radio station genres.

● Browse by language — View the languages in which there are stations

broadcasting.

● Browse by country/region — View the countries in which there are stations

broadcasting.

● Top stations — View the most popular stations in the directory.

Music

Search for stations

Select Menu > Music > Internet radio.

To search for radio stations in the Nokia Internet Radio service by name, do the

following:

1. Select Search.

2. Enter a station name or the first letters of the name in the search field, and select

Options > Search.

Matching stations are displayed.

To listen to a station, select the station and Options > Listen.

To save a station to your favourites, select the station and Options > Add to

Favourites.

To make another search, select Options > Search again.

Favourite stations

Select Menu > Music > Internet radio.

To view and listen to your favourite stations, select Favourites.

To add a station manually to favourites, select Options > Add station manually.

Enter the web address of the station and a name that you want to appear in the

favourites list.

To add the currently playing station to favourites, select Options > Add to

Favourites.

To view station information, to move a station up or down in the list, or to delete

a station from favourites, select Options > Station and the desired option.

To view only stations beginning with particular letters or numbers, start entering

the characters. Matching stations are displayed.

Internet radio settings

Select Menu > Music > Internet radio and Options > Settings.

Music

To select the default access point to connect to the network, select Default access

point and from the available options. If you want the device to ask you to select

the access point every time you open the application, select Always ask.

To change the connection speeds for different connection types, select from the

following:

● GPRS connection bitrate — GPRS packet data connections

● 3G connection bitrate — 3G packet data connections

The quality of the radio broadcast depends on the selected connection speed. The

higher the speed, the better the quality. To avoid buffering, use the highest quality

only with high speed connections.

10. Camera

Your device supports an image capture resolution of 1600x1200 pixels. The image

resolution in this guide may appear different.

Activate the camera

To activate the camera, press the capture key.

Image capture

Still image controls and indicators

The still image viewfinder displays the following:

1 — Mode indicator

2 — Zoom slider. To activate or deactivate the zoom slider, tap the screen.

Camera

3 — Capture icon

4 — Capture settings

5 — Battery charge level indicator

6 — Image resolution indicator

7 — Image counter (the estimated number of images you can capture using the

current image quality setting and available memory)

8 — Memory in use. Depending on the setup of your device, there are the following

options: device memory (

) or memory card ( ).

9 — GPS signal indicator

10 — Scene modes

Capture and recording settings

To open the capture and recording settings view before capturing an image or

recording a video clip, select Menu > Applications > Camera and

The capture and recording settings view provides you with shortcuts to different

items and settings before capturing an image or recording a video clip.

The capture and recording settings return to the default settings after you close the

camera.

Select from the following:

— Select the scene.

or — Switch between video and image mode.

or — Show or hide the viewfinder grid (images only).

— Activate the self-timer (images only).

— Activate sequence mode (images only).

— Open Gallery.

Image settings:

Camera

— Select a colour effect.

— Adjust the white balance. Select the current lighting conditions. This allows

the camera to reproduce colours more accurately.

— Adjust the exposure compensation (images only). If you are shooting a dark

subject against a very light background, such as snow, adjust the exposure to +1 or

+2 to compensate for the background brightness. For light subjects against a dark

background, use -1 or -2.

— Adjust light sensitivity (images only). Increase the light sensitivity in low light

conditions to avoid too dark images and blurry images. Increasing the light

sensitivity may also increase the image noise.

— Adjust contrast (images only). Adjust the difference between the lightest and

darkest parts of the image.

— Adjust sharpness (images only).

The screen display changes to match the settings you define.

The capture settings are shooting-mode specific. Switching between the modes

does not reset the defined settings.

If you select a new scene, the capture settings are replaced by the selected scene.

You can change the capture settings after selecting a scene if needed.

Saving the captured image may take longer if you change the zoom, lighting, or

colour settings.

Capture images

When capturing an image, note the following:

● Use both hands to keep the camera still.

● The quality of a digitally zoomed image is lower than that of a non-zoomed

image.

● The camera goes into battery saving mode if there are no actions for about a

minute. To continue capturing images, select Continue.

Camera

To capture an image, do the following:

1. To switch from video mode to image mode, if necessary, select

> .

2. To capture an image, press the capture key. Do not move the device before the

image is saved and the final image displayed.

To zoom in or out when capturing an image, use the zoom slider.

To leave the camera open in the background and use other applications, press the

menu key. To return to the camera, press and hold the capture key.

After capturing an image

After you capture an image, select from the following options (available only if you

have selected Options > Settings > Show captured image > Yes):

●

— Send the image in a multimedia or e-mail message, or through connection

methods such as Bluetooth connectivity.

To send the image to the person you are talking to, select

during a call.

●

— Upload the image to a compatible online album.

●

Delete — Delete the image.

Use the image as wallpaper in the home screen — Select Options > Use

image > Set as wallpaper.

Set the image as a default call image — Select Options > Use image > Set as

call image.

Assign the image to a contact — Select Options > Use image > Assign to

contact.

Return to the viewfinder, to capture a new image — Press the capture key.

Location information

You can automatically add capture location information to the file details of the

captured material.

Select Menu > Applications > Camera.

Camera

To add location information to all captured material, select Options > Settings >

Show GPS info > On.

It may take several minutes to obtain the coordinates of your location. The

availability and quality of GPS signals may be affected by your location, buildings,

natural obstacles, and weather conditions. If you share a file that includes location

information, also the location information is shared, and your location may be

visible to third parties viewing the file. The device requires network services to

acquire location information.

Location information indicators:

●

— Location information unavailable. GPS stays on in the background for

several minutes. If a satellite connection is found and the indicator changes to

within that time, all the images captured and video clips recorded during that

time are tagged based on the received GPS positioning information.

●

— Location information is available. Location information is added to the file

details.

Location information can be added to an image or a video clip if location coordinates

are found via the network. It may take several minutes to receive the coordinates.

The best conditions are obtained in open areas away from high buildings.

If you share your image or video clip which has location information attached to it,

the location information is also shared and your location may be visible to third

parties that can view the image or the video clip.

You may disable the geotagging service in camera settings.

You in the image — self-timer

Use the self-timer to delay the capture so that you can include yourself in the image.

To set the self-timer delay, select

> , and the delay needed before the image

is captured.

To activate the self-timer, select Activate. The stopwatch icon on the screen blinks

and the remaining time is displayed when the timer is running. The camera captures

the image after the selected delay elapses.

Camera

To switch off the self-timer, select > > .

Tip: Select 2 seconds to keep your hand steady when capturing an image.

Capture images in a sequence

Select Menu > Applications > Camera.

To start capturing images in a quick sequence, select Menu > Applications >

Camera and

> Sequence. To close the settings window, tap the screen above

the window. Press and hold the capture key. The device captures images until you

release the key or until the memory runs out. If you press the capture key briefly,

the device captures 18 images in a sequence.

The captured images are displayed in a grid. To view an image, select the image.

To return to the sequence mode viewfinder, press the capture key.

You can also use sequence mode with the self-timer.

To deactivate sequence mode, select

> Single shot.

Video recording

Record videos

1. To switch from image mode to video mode, if necessary, select and the video

mode

2. To start recording, press the capture key or tap

. A red record icon is displayed,

and a tone sounds.

3. To pause recording at any time, select Pause. To resume, select Continue. If you

pause recording and do not press any key within one minute, the recording

stops.

To zoom in or out of the subject, use the zoom key in your device.

Camera

4. To stop recording, press the capture key. The video clip is automatically saved

in Gallery. The maximum length of a video clip is approximately 30 seconds with

sharing quality and 90 minutes with other quality settings.

Video recording controls and indicators

The video viewfinder displays the following:

1 — Mode indicator

2 — Audio mute indicator

3 — Record icon

4 — Recording settings

5 — Battery charge level indicator

6 — Video quality indicator. To modify this setting, select Options > Settings >

Video quality.

7 — Video clip file type

8 — Available recording time. When you are recording, the current video length

indicator also shows the elapsed and remaining time.

9 — The location to which the video clip is saved

10 — Scene modes

After recording a video clip

After you record a video clip, select from the following options (available only if you

have selected Options > Settings > Show last captured video > Yes):

Camera

● Play — Play the video clip you just recorded.

●

— Upload the image to a compatible online album.

●

Delete — Delete the video clip.

To return to the viewfinder to record a new video clip, press the capture key.

11. Gallery

To store and organise your images, video clips, sound clips, and streaming links,

select Menu > Gallery.

Tip: To access the images and video clips view quickly, tap the media key

(

) to open the media bar, and select .

View and organise files

Select Menu > Gallery and from the following:

●

Images & videos — View images in the image viewer and videos in Video

centre.

●

Songs — Open Music player.

●

Sound clips — Listen to sound clips.

●

Other media — View presentations.

You can browse, open, and create folders; and mark, copy, move, and add items to

folders.

Files stored on your compatible memory card (if inserted) are indicated with

To open a file, select a file from the list. Video clips and files with the .ram file

extension open and play in Video centre, and music and sound clips in Music player.

To copy or move files to the memory card (if inserted) or device memory, select a

file, Options > Organise > Copy or Move, and from the available options.

Gallery

View images and videos

Select Menu > Gallery and Images & videos.

The images, video clips, and folders are ordered by date and time. To browse the

files, swipe up or down.

To open a file, select a file from the list. When viewing an image, to view the next

or previous image, swipe the image left or right, respectively. To zoom in an image,

use the volume key in your device.

Select Options and from the following:

● Edit — Edit a video clip or an image.

● Use file — To use the image as wallpaper in the home screen, select Set as

wallpaper.

To set the image as a generic call image, select Set as call image.

To set the image as a call image for a contact, select Assign to contact.

To set the video clip as a ringing tone, select Set as ringing tone.

To assign the video clip as a ringing tone for a contact, select Assign to

contact.

The toolbar helps you select frequently used functions with images, video clips, and

folders.

From the toolbar, select from the following:

●

Send — Send the selected image or video clip.

●

Edit — Edit the selected image or video clip.

●

Delete — Delete the selected image or video clip.

Organise images and videos

Select Menu > Gallery and Images & videos > Options and from the following:

● Folder options — To move files to folders, select Move to folder. To create a

new folder, select New folder.

Gallery

● Organise — To copy files to folders, select Copy. To move files to folders, select

Move.

● View by — View files by date, title, or size.

12. Share online

About Share online

Select Menu > Internet > Share online.

With Share online (network service), you can post your images, video clips, and

sound clips from your device to compatible online sharing services, such as albums

and blogs. You can also view and send comments to the posts in these services, and

download content to your compatible Nokia device.

The supported content types and the availability of the Share online service may

vary.

Subscribe to services

Select Menu > Internet > Share online.

To subscribe to an online sharing service, go to the service provider's website, and

check that your Nokia device is compatible with the service. Create an account as

instructed on the website. You receive a user name and password needed to set up

your device with the account.

1. To activate a service, open the Share online application in your device, select a

service and Options > Activate.

2. Allow the device to create a network connection. If you are prompted for an

internet access point, select one from the list.

3. Sign in to your account as instructed on the service provider’s website.

For the availability and cost of the third party services and data transfer costs,

contact your service provider or the relevant third party.

Share online

Manage your accounts

To view your accounts, select Options > Settings > My accounts.

To create a new account, select Options > Add new account.

To change your user name or password for an account, select the account and

Options > Open.

To set the account as the default when sending posts from your device, select

Options > Set as default.

To remove an account, select the account and Options > Delete.

Create a post

Select Menu > Internet > Share online.

To post media files to a service, go to a service, and select Options > New

upload. If the online sharing service provides channels for posting files, select the

desired channel.

To add an image, video clip, or sound clip to the post, select Options > Insert.

Enter a title or description for the post, if available.

To add tags to the post, select Tags:.

To enable the posting of location information contained in the file, select

Location:.

To send the post to the service, select Options > Upload.

Post files from Gallery

You can post your files from Gallery to an online sharing service.

1. Select Menu > Gallery and the files you want to post.

2. Select Options > Send > Upload and the desired account.

3. Edit your post as required.

Share online

4. Select Options > Upload.

13. Nokia Video Centre

With Nokia Video Centre (network service), you can download and stream video

clips over the air from compatible internet video services using a packet data

connection. You can also transfer video clips from a compatible PC to your device

and view them in Video centre.

Using packet data access points to download videos may involve the transmission

of large amounts of data through your service provider's network. Contact your

service provider for information about data transmission charges.

Your device may have predefined services.

Service providers may provide free content or charge a fee. Check the pricing in the

service or from the service provider.

View and download video clips

Connect to video services

1. Select Menu > Applications > Video centre.

2. To connect to a service to install video services, select Add new services and

the desired video service from the service catalogue.

View a video clip

To browse the content of installed video services, select Video feeds.

The content of some video services is divided into categories. To browse video clips,

select a category.

To search for a video clip in the service, select Video search. Search may not be

available in all services.

Some video clips can be streamed over the air, but others must be first downloaded

to your device. To download a video clip, select Options > Download. Downloads

Nokia Video Centre

continue in the background if you exit the application. The downloaded video clips

are saved in My videos.

To stream a video clip or view a downloaded one, select Options > Play. When

the video clip is playing, to use the control keys for controlling the player, tap the

screen. To adjust the volume, use the volume key.

Warning: Continuous exposure to high volume may damage your hearing.

Listen to music at a moderate level, and do not hold the device near your ear when

the loudspeaker is in use.

Select Options and from the following:

● Resume download — Resume a paused or failed download.

● Cancel download — Cancel a download.

● Preview — Preview a video clip. This option is available if supported by the

service.

● Feed details — View information about a video clip.

● Refresh list — Refresh the list of video clips.

● Open link in browser — Open a link in the web browser.

Schedule downloads

Setting the application to download video clips automatically may involve the

transmission of large amounts of data through your service provider's network. For

information about data transmission charges, contact your service provider. To

schedule an automatic download for video clips in a service, select Options >

Schedule downloads. Video centre automatically downloads new video clips daily

at the time you define.

To cancel scheduled downloads, select Manual download as the download

method.

Video feeds

Select Menu > Applications > Video centre.

Nokia Video Centre

The content of the installed video services is distributed using RSS feeds. To view

and manage your feeds, select Video feeds.

Select Options and from the following:

● Feed subscriptions — Check your current feed subscriptions.

● Feed details — View information about a video.

● Add feed — Subscribe to new feeds. Select Via Video directory to select a feed

from the services in the video directory.

● Refresh feeds — Refresh the content of all feeds.

● Manage account — Manage your account options for a particular feed, if

available.

To view the videos available in a feed, select a feed from the list.

My videos

My videos is a storage place for all video clips. You can list downloaded video clips

and video clips recorded with the device camera in separate views.

Select Menu > Applications > Video centre.

Select Options and from the following:

● Resume download — Resume a paused or failed download.

● Cancel download — Cancel a download.

● Video clip details — View information about a video clip.

● Find — Find a video clip. Enter a search term that matches the file name.

● Memory status — View the amount of available and used memory.

● Sort by — Sort video clips. Select the desired category.

● Move and copy — Move or copy video clips. Select Copy or Move and the desired

location.

Transfer videos from your PC

Transfer your own video clips from compatible devices using a compatible USB data

cable. Only video clips which are in a format supported by your device are shown.

Nokia Video Centre

1. To view your device on a PC as a mass memory device where you can transfer

any data files, connect using a USB data cable.

2. Select Mass storage as the connection mode. A compatible memory card needs

to be inserted in the device.

3. Select the video clips you want to copy from your PC.

4. Transfer the video clips to E:\My Videos in the memory card.

The transferred video clips appear in the My videos folder.

Video centre settings

In the Video centre main view, select Options > Settings and from the following:

● Video service selection — Select the video services that you want to appear in

Video centre. You can also add, remove, edit, and view the details of a video

service. You cannot edit preinstalled video services.

● Connection settings — To define the network destination used for the network

connection, select Network connection. To select the connection manually each

time Video centre opens a network connection, select Always ask.

To set GPRS connection on or off, select Confirm GPRS usage.

To set roaming on or off, select Confirm roaming.

● Parental control — Set an age limit to videos. The required password is the

same as the device lock code. The factory setting for the lock code is 12345. In

video-on-demand services, videos which have the same or a higher age limit

than you have set, are hidden.

● Preferred memory — Select whether downloaded videos are saved in the

device memory or on a compatible memory card.

● Thumbnails — Select whether to download and view thumbnail images in

video feeds.

Nokia Video Centre

14. Internet

About the web browser

Select Menu > Internet > Web.

Catch up on the news and visit your favourite websites. You can use your device

web browser to view web pages on the internet.

To browse the web, you must have an internet access point configured in your

device and be connected to a network.

Browse the web

Select Menu > Internet > Web.

Go to a website — Select the web address bar, enter a web address, and select

Tip: To search the internet, select the web address bar, enter the search word,

and select the link below the web address bar.

Zoom in or out — Double-tap the screen.

A cache is a memory location that is used to store data temporarily. If you have tried

to access or have accessed confidential information requiring passwords, empty the

cache after each use. The information or services you have accessed are stored in

the cache.

Empty the cache — Select

> > Privacy > Clear privacy data > Cache.

Add a bookmark

If you visit the same websites all the time, add them to your Bookmarks view, so

you can easily access them.

Select Menu > Internet > Web.

While browsing, select

> .

Internet

Go to a bookmarked website while browsing — Select > and a

bookmark.

Subscribe to a web feed

You don't have to visit your favourite websites regularly to keep up with what's new

on them. You can subscribe to web feeds and get links to latest content

automatically.

Select Menu > Internet > Web.

Web feeds on web pages are usually indicated with

. They are used to share, for

example, the latest news headlines or blog entries.

Go to a blog or web page that contains a web feed, and select

> and the

desired feed.

Update a feed — In the Web feeds view, select and hold the feed, and from the

pop-up menu, select Refresh.

Set a feed to automatically update — In the Web feeds view, select and hold the

feed, and from the pop-up menu, select Edit > Automatic updates.

15. Positioning (GPS)

You can use applications such as GPS data to calculate your location or measure

distances. These applications require a GPS connection.

About GPS

The Global Positioning System (GPS) is operated by the government of the United

States, which is solely responsible for its accuracy and maintenance. The accuracy

of location data can be affected by adjustments to GPS satellites made by the United

States government and is subject to change with the United States Department of

Defense civil GPS policy and the Federal Radionavigation Plan. Accuracy can also be

affected by poor satellite geometry. Availability and quality of GPS signals may be

affected by your location, buildings, natural obstacles, and weather conditions. GPS

Positioning (GPS)

signals may not be available inside buildings or underground and may be impaired

by materials such as concrete and metal.

GPS should not be used for precise location measurement, and you should never

rely solely on location data from the GPS receiver and cellular radio networks for

positioning or navigation.

The trip meter has limited accuracy, and rounding errors may occur. Accuracy can

also be affected by availability and quality of GPS signals.

The coordinates in the GPS are expressed using the international WGS-84 coordinate

system. The availability of the coordinates may vary by region.

Assisted GPS (A-GPS)

Your device also supports Assisted GPS (A-GPS).

A-GPS is a network service.

Assisted GPS (A-GPS) is used to retrieve assistance data over a packet data

connection, which assists in calculating the coordinates of your current location

when your device is receiving signals from satellites.

When you activate A-GPS, your device receives useful satellite information from an

assistance data server over the cellular network. With the help of assisted data, your

device can obtain the GPS position faster.

Your device is preconfigured to use the Nokia A-GPS service, if no service provider-

specific A-GPS settings are available. The assistance data is retrieved from the Nokia

A-GPS service server only when needed.

You must have an internet access point defined in the device to retrieve assistance

data from the Nokia A-GPS service over a packet data connection. To define an access

point for A-GPS, select Menu > Applications > Location and Positioning >

Positioning server > Access point. Only a packet data internet access point can

be used. Your device asks for the internet access point when GPS is used for the first

time.

Positioning (GPS)

Hold your device correctly

When using the GPS receiver, ensure you do not cover the antenna with your hand.

Establishing a GPS connection may take from a couple of seconds to

several minutes. Establishing a GPS connection in a vehicle may take

longer.

The GPS receiver draws its power from the device battery. Using the

GPS receiver may drain the battery faster.

Tips on creating a GPS connection

Check satellite signal status

To check how many satellites your device has found, and whether your device is

receiving satellite signals, select Menu > Applications > Location and GPS

data > Options > Satellite status.

If your device has found satellites, a bar for each

satellite is shown in the satellite info view. The longer

the bar, the stronger the satellite signal. When your

device has received enough data from the satellite

signal to calculate your location, the bar colour

changes.

To view the positions of found satellites, select Chg. view.

Initially your device must receive signals from at least four satellites to be able to

calculate your location. When the initial calculation has been made, it may be

possible to continue calculating your location with three satellites. However, the

accuracy is generally better when more satellites are found.

If no satellite signal can be found, consider the following:

● If you are indoors, go outdoors to receive a better signal.

Positioning (GPS)

● If you are outdoors, move to a more open space.

● Ensure that your hand does not cover the GPS antenna of your device.

● If the weather conditions are bad, the signal strength may be affected.

● Some vehicles have tinted (athermic) windows, which may block the satellite

signals.

Position requests

You may receive a request from a network service to receive your position

information. Service providers may offer information about local topics, such as

weather or traffic conditions, based on the location of your device.

When you receive a position request, the service that is making the request is

displayed. Select Accept to allow your position information to be sent or Reject to

deny the request.

Landmarks

Select Menu > Applications > Location and Landmarks.

With Landmarks, you can save the position information of specific locations in your

device. You can sort the saved locations into different categories, such as business,

and add other information to them, such as addresses. You can use your saved

landmarks in compatible applications, such as GPS data.

GPS coordinates are expressed using the international WGS-84 coordinate system.

Select Options and from the following:

● New landmark — Create a new landmark. To make a positioning request for

your current location, select Current position. To enter the position information

manually, select Enter manually.

● Edit — Edit or add information to a saved landmark (for example, a street

address).

● Add to category — Add a landmark to a category in Landmarks. Select each

category to which you want to add the landmark.

Positioning (GPS)

● Send — Send one or several landmarks to a compatible device. Your received

landmarks are placed in the Inbox folder in Messaging.

You can sort your landmarks into preset categories, and create new categories. To

edit and create new landmark categories, open the categories tab, and select

Options > Edit categories.

GPS data

GPS data is designed to provide route guidance information to a selected

destination and traveling information, such as the approximate distance to the

destination and approximate duration of travel. You can also view position

information about your current location.

Select Menu > Applications > Location and GPS data.

Positioning settings

Select Menu > Applications > Location and Positioning.

Positioning methods

Select from the following:

● Integrated GPS — Use the integrated GPS receiver of your device.

● Assisted GPS — Use Assisted GPS (A-GPS) to receive assistance data from an

assistance data server.

● Bluetooth GPS — Use a compatible external GPS receiver with Bluetooth

connectivity.

● Network based — Use information from the cellular network (network service).

Positioning server

To define an access point and positioning server for network-assisted positioning

methods, such as assisted GPS or network-based positioning, select Positioning

server. The positioning server may be preset by your service provider, and you may

not be able to edit the settings.

Positioning (GPS)

Notation settings

To select which measurement system you want to use for speeds and distances,

select Measurement system > Metric or Imperial.

To define in which format the coordinate information is displayed in your device,

select Coordinate format and the desired format.

16. Maps

Maps overview

Select Menu > Maps.

Welcome to Maps.

Maps shows you what is nearby, helps you plan your route, and guides you where

you want to go.

● Find cities, streets, and services.

● Find your way with turn-by-turn directions.

● Synchronise your favourite locations and routes between your mobile device and

the Ovi Maps internet service.

● Check weather forecasts and other local information, if available.

Some services may not be available in all countries, and may be provided only in

selected languages. The services may be network dependent. For more information,

contact your network service provider.

Almost all digital cartography is inaccurate and incomplete to some extent. Never

rely solely on the cartography that you download for use in this device.

Content such as satellite images, guides, weather and traffic information and

related services are generated by third parties independent of Nokia. The content

may be inaccurate and incomplete to some extent and is subject to availability.

Never rely solely on the aforementioned content and related services.

Maps

View your location and the map

See your current location on the map, and browse maps of different cities and

countries.

Select Menu > Maps and My position.

marks your current position, if available. When your device is searching for your

position,

blinks. If your position is not available, indicates your last known

position.

If only cell ID based positioning is available, a red halo around the positioning icon

indicates the general area you might be in. In densely populated areas, the accuracy

of the estimate increases, and the red halo is smaller than in lightly populated areas.

Move on the map — Drag the map with your finger. By default, the map is oriented

north.

View your current or last known location — Select

Zoom in or out — Select + or -.

If you browse to an area not covered by the maps that are stored on your device

and you have an active data connection, new maps are automatically downloaded.

Map coverage varies by country and region.

Maps

Map view

1 — Selected location

2 — Indicator area

3 — Point of interest (for example, a railway station or a museum)

4 — Information area

Change the look of the map

View the map in different modes, to easily identify where you are.

Select Menu > Maps and My position.

Select

and from the following:

● Map view — In the standard map view, details such as location names or

motorway numbers, are easy to read.

● Satellite view — For a detailed view, use satellite images.

Maps

● Terrain view — View at a glance the ground type, for example, when you are

travelling off-road.

● 3D view — For a more realistic view, change the perspective of the map.

● Landmarks — Display prominent buildings and attractions on the map.

● Night mode — Dim the colours of the map. When travelling at night, the map

is easier to read in this mode.

Download and update maps

To avoid mobile data transfer costs, download the latest maps and voice guidance

files to your computer, and then transfer and save them to your device.

Use the Nokia Ovi Suite application to download the latest maps and voice guidance

files to your compatible computer. To download and install Nokia Ovi Suite on your

compatible computer, go to www.ovi.com.

Tip: Save new maps to your device before a journey, so you can browse the

maps without an internet connection when travelling abroad.

To make sure your device does not use an internet connection, in the main menu,

select

> Internet > Connection > Offline.

About positioning methods

Maps displays your location on the map using GPS, A-GPS, or cell ID based

positioning.

The Global Positioning System (GPS) is a satellite-based navigation system used for

calculating your location. Assisted GPS (A-GPS) is a network service that improves

the speed and accuracy of the positioning.

When you use Maps for the first time, you are prompted to define an internet access

point to download map information or use A-GPS.

indicates the availability of the satellite signals. One bar is one satellite.

When the device is searching for satellite signals, the bar is yellow. When there is

enough data available to calculate your location, the bar turns green. The more

green bars, the more reliable the location calculation.