Brand Model
Camera Select Setting
Cable Shutter Record ISO SS AV
Tr
gger
Auto Focus
ec
ron
c
Focus
wer
Su
l
Note
EOS R
√ √ √ √ √ √ √
— Camera firmwareVer.1.0.0
EOS RP
√ √ √ √ √ √ √
— Camera firmwareVer.1.0.1
EOS 6D Mark II
*
√ √ √ √ √ √
— Camera firmwareVer.1.0.0
EOS 6D *
√
√ √ √ √ √
—
EOS 60D *
√
√ √ √ √ √
—
EOS 77D *
√
√ √ √ √ √
—
EOS 80D *
√ √ √ √ √ √
—
EOS 5D2 *
√
√ √ √ √ √
—
EOS 5D3 *
√ √ √ √ √ √
—
EOS 800D/Kiss X9i *
√
—
√ √ √ √
— Camera firmwareVer.1.0.1
EOS 5D Mark IV
*
√ √ √ √ √ √
—
EOS 200D Ⅱ
*
√ √ √ √ √ √
— Camera firmwareVer.1.0.0
EOS M50
√ √ √ √ √ √ √
— Camera
irmwareVer.1.0.0
EOS 90D
*
√
√ √ √ √
— —
EOS M6 Ⅱ
M3C-C
√ √ √ √ √ √ √
—
EOS M5
√
— — — — — — —
EOS 750D/Kiss X8i
√
— — — — — — —
α7R
7
—
√ √ √ √ √
— —
α7S (A7 S)
—
√ √ √ √ √
— — Camera firmware Ver 3.20
α6000
—
√ √ √ √ √
— — Camera firmware Ver 3.21
α6300
—
√ √ √ √ √
—
√
α6400
—
√ √ √ √ √ √ √
Camera firmware Ver.2.00
α6500
—
√ √ √ √ √
—
√
Camera firmware Ver.1.06
α7S Ⅱ
7S M2
—
√ √ √ √ √
—
√
α7R Ⅱ(A7R M2)
—
√ √ √ √ √
—
√
α7 Ⅱ
7 M2
—
√ √ √ √ √
— —
α7 Ⅲ
7 M
—
√ √ √ √ √ √ √
Camera firmware Ver 3.10
α7R Ⅲ (A7R M3)
—
√ √ √ √ √ √ √
Camera firmware Ver.3.10
DSC-RX100M3
—
√ √ √ √ √
—
√
DSC-RX100M4 —
√ √ √ √ √
—
√
DSC-RX100M5 —
√ √ √ √ √
—
√
α7R (A7 R)
MCSC-Multi
√ √
— — —
√
— —
α7S
7
√ √
— — —
√
— — Camera firmware Ver 3.20
α7S III
7S M
√ √
— — —
√
— —
α6000
√ √
— — —
√
— — Camera firmware Ver 3.21
α6300
√ √
— — —
√
—
√
α6400
√ √
— — —
√
—
√
Camera firmware Ver.2.00
α6500
√ √
— — —
√
—
√
Camera firmware Ver.1.06
α7S Ⅱ
7S M2
√ √
— — —
√
—
√
α7R Ⅱ
7R M2
√ √
— — —
√
—
√
α7 Ⅱ (A7 M2)
√ √
— — —
√
— —
α7 Ⅲ
7 M
√ √
— — —
√
—
√
Camera firmware Ver.3.10
α7R Ⅲ
7R M
√ √
— — —
√
—
√
α7R Ⅳ (A7R M4)
√ √
— — —
√
—
√
Camera firmware Ver 1.10
DSC-RX100M3
√ √
— — —
√
—
√
DSC-RX100M4
√ √
— — —
√
—
√
DSC-RX100M5
√ √
— — —
√
—
√
ZV1
√ √
— — —
√
—
√
Camera firmware Ver 1.00
Not support vertical mode
G7
√ √
— — —
√
— —
G85
√ √
— — —
√
— —
GH3
√ √
— — —
√
— —
GH4
√ √
— — —
√
— —
√ √
— — — — — —
√ √ √ √ √ √ √ √
GH5
√ √ √ √ √ √ √
— Camera firmware Ver 2.6
GH5s
√ √ √ √ √ √ √
—
Z6
√ √ √ √ √ √ √
— Camera firmware C 3.00
Z7
√ √ √ √ √ √ √
— Camera firmware C 3.00
D850 M3C-Micro
√ √ √ √ √ √ √
—
X-T2
√ √
— — —
√
— —
X-T3
√ √
— — —
√
— —
X-T20
√ √
— — —
√
— —
X-T30
√ √
— — —
√
— —
X-A7
√ √
— — —
√
— —
X-T3
√ √ √ √ √ √ √
—
X-T3 needs to be upgraded to the
latest firmware. Please refer to the
firmware update manual to adjust
the settin
s before auto tunin
.
BMD BMPCC 4K —
√
— — — — — —
Z CAM Z CAM E2 M3C-LANC M3C-LANC —
√
— — —
√
— —
MOZA AirCross 2 Camera Compatibility List(For Firmware V 1.0.6)
Notes for Canon camera connection:
1.* Indicates that the Canon DSLR camera is recommended to be set to MF mode. If the camera is shot in AF mode, there will be a low probability of focus failure and jam.
2. Pay attention to the sequence when connecting EOS R/RP to the gimbal:
Turn on the EOS R/RP power -> turn on the gimbal-> connect the gimbal.
When shutting down: disconnect the gimbal and EOS R/RP -> turn off the gimbal -> turn off the camera
Notes for Sony camera connection:
1. Turn off the "Control with smartphone" function in the camera. The specific setting method is as follows:
Select Menu -> Network -> Control with Smartphone -> Select "off".
2. Set the "USB connection" function of the camera to "computer remote control". The specific setting method is as follows:
Select Menu -> Select "Settings" -> Select "USB Connection" -> Select "PC Remote".
3. The 5-axis image stabilization function of the camera will be forced to turn off. When the anti-shake function of the lens is turned on, the anti-shake function will not be affected;
4. The camera will not be able to playback when connecting the control cable.
5. The three models that can achieve electronic follow focus are: Alpha 7 Ⅲ, Alpha 7R Ⅲ, Alpha 6400, the lens needs to be set to AF mode, and the camera needs to be set to MF mode
6. For both Micro cable and Multi/C cable, when connecting the camera, if it appears "please check the connected device", please restart the stabilizer and reconnect the camera and the gimbal.
7. Sony ZV1 cannot be balanced in the vertical mode in a default configuration.
8. If the power supply setting is turned off in the Sony camera, the gimbal can still supply power to the camera. Please switch the cable selection (Multi←→Multi/C) to decide whether to power the camera or not. Multi cable means without power
supply, Multi/C means power supply.
The electronic follow focus function is not available with some lenses.
M3C-CP and M3C-LANC cables are optional, you can purchase those cables from https://store.gudsen.com/.
©2020GUDSENAllRightsReserved.
Notes
Canon
SONY
Panasonic
Nikon
FUJIFILM
S1
M3C-USB
Shutter Cable
M3C-USB
MCSC-Multi
MCSC-Multi/C
MCSC-Remote
M3C-USB
M3C-USB
Camera firmware Ver.1.2
Shutter Cable
M3C-USB
M3C-C
M3C-Mini
M3C-Micro
MCSC-C1
M3C-Micro
MCSC-Multi/C
MCSC-Remote
M3C-C
M3C-C
MCSC-C1
M3C-CP