General setting
1. Tap <General>.
2. Configure the basic camera
settings.
•
Camera Name : Camera name
is used to enable you to identify
the camera.
• Speaker/Mic : Adjust the
volume for the camera’s built-in
mic or speaker.
M
If you set the mic to zero, there will be no
live sound and no audio event and also
there is no recording in the SD card.
• Audio REC : The voice can be
recorded or deleted by users.
• Night Vision : Set the IR lighting.
Check <Night Vision> to set
the camera to switch to the
night vision mode automatically.
M
In the case of SNH-1010N, you can
check <Night Vision> for a
camera to automatically operate the
IR lighting for two minutes
depending on the brightness of the
neighboring areas.
• WDR : You can compensate for
the backlight by making a dark
area brighter, and a bright area
darker.
• LDC : Sets whether to use the
image correction distortion
function or not.
01. Add personalized audio clip
02. Add personalized audio clip
03. Add personalized audio clip
04. Add personalized audio clip
05. Add personalized audio clip
06. Add personalized audio clip
07. Add personalized audio clip
08. Add personalized audio clip
09. Add personalized audio clip
10. Add personalized audio clip
Audio List
Back
If you don't want to save camera password,
please go to settings to disable "Save
camera password".
Current Password
New Password
Use 1 - 8 numbers and/or letters
Confirm password
Show Password
Password
Back Apply
General
Back Apply
Camera Name test
Audio REC
.
Night Vision
WDR
LDC
Display date
Save camera password
Change camera password
.
Speaker
Mic